Recent content by EpoxyCoat2

We have kits available with epoxy base coat, flake and polyurethane top coat. If you are interested please contact us at the office.

If you used our Epoxy-Coat product, email us a picture of your garage to enter our contest! You can win $100 if your name is drawn! [email protected] :) Thanks!

You can degrease, power wash, and grind. The grinder should remove any remaining loose concrete that the power washer did not already remove. You can remove and re-pour these areas as mentioned or you can patch them. Removing and pouring new concrete would, of course, be the more permanent...

As long as you scuff up the current coat with 100 grit sandpaper, the new coat will bond.

Looks Great!

What cleaners are you using on the coating? To bring back the shine you can apply another coat of clear coat or you can apply an acrylic floor wax on the area.

Congrats on the new purchase! As stated above, if you're looking for a coating that will last much, much longer, go with a higher solids, more expensive coating. It is truly worth the money in the long run.

Stick it a sign that it is beginning to cure. You stated above that you did mix part "A" with part "B", so it could be that the mixing ratio is off, and might eventually cure. It will just take longer. In the situation that it does not cure, you can apply another coat of clear OR color over the...

As stated above, you will want to use the Diamabrush coating removal tool. It will remove the coating and create a rough profile on the concrete. As for applying the flake into the sealer coat, I don't think that is correct. Typically, the sealer coat is applied over the top of the basecoat and...

Yes the epoxy is epoxy based. http://www.epoxy-coat.com/shop/residential/concrete-preparation/patch-kit.html

Great Job! Looks AWESOME!

It's a 24 hour cure time when applying in 70 degree temperature and low humidity. I recommend waiting 3-7 days (depending on temps/humidity) before driving on your floor. As Justin stated above, confirm that it is cured and tack free before driving on it. Humidity and low temperatures can cause...

Diamond grind the floor first, then use our Concrete Patch Kit, or a slurry as Scotty recommended, to fill the pitting. The epoxy will fill some minor issues, but not the deeper holes.

Forest Road, I'm sorry that you had such a negative experience with our product. Our website mentions that diamond grinding is the preferred preparation method, but it is not necessary if you have concrete that is in good condition and you do not currently have a sealer. We have had many...