Recent content by falconx

I used 2x12’s on top mainly so I can have enough space to anchor 4 bolts: 1 for ledger. two for the bracket, 1 through the locker. All 4 ledgerlok bolts directly into stud. 2x10 may have worked it the 12’s gave me more space between the bolts vertically to minimize chance of the board from...

I basically added a ledger top and bottom and added blocking between . Came out perfect with addition rigidity. I upgraded all bolts to 5” ledgerloks from fasten master, added steel brace plates as well to each bolt. Used a Hydraulic Jack to lift the unit onto the wall bracket, leveled then...

Draco , I ordered the pro version which is heavier system, even empty it is considerable weight and if I hang it on a top ledger and bolt it to the studs I just feel it may be too much weight for the wall unless I reinforce the wall which is way too much work. I just had the floor done with...

My concern is the weight of the entire system will be on the wall, it seems like it’s meant for it however just thinking of all scenarios. Regarding the outlet I have 2 double gang on each side of the center workbench but will be behind the locker. Since I have a stem wall protrusion I can...

Hello guys So my choice of a 2x12 was more to the fact of a more robust header, prob 2x8 or 2x10 would work as well. However I find myself second guessing if the weight of these cabinets with stuff will be too much to wall hang. Even if I create this ledger frame and lag bolt everything. Will...

Is 43 inches too high for the countertop ? I choose this height because it would give clearance for the bottom holes to be able to anchor to the bottom ledger . Also I placed two 2-gang 20 amp receptacles that now would be behind the lockers. Should I cutout the back of the lockers to access...

May I ask how high from the floor your cabinets are? I was thinking 9.5 inches to make the countertop at 43 inches . Would that be too high?

Hello New to thread and was hoping to get some advice on a few things . Have a 3 car garage and recently had an epoxy /polyaspartic floor coating placed. Bought a 14 piece NewAge Pro set to install and wall hung. However I do have a 15 inch stem wall that protrudes about 1-1.5” . I was...