Recent content by glazier

Re: Holy ****! That's scarey! I own one like that, it has all the guards and a 24' table 12' on each side. Mine is 3 phase 5 hp, I use it to cut aluminum extrusion with a 18" Nordic Blade. This saw is a beast, a company called Topps has a modern design of it. This particular saw requires about...

That is a very nice garage, there is nothing about it I don't like. What size tractor is that with the FEL in the air?

Mr Dow Corning? 795

Beatle bugs are the problem we have this time of year.

Crazy to read this post, I am actually going to caulk about 240' of saw joint in my new garage in the morning. I am a Dow Corning dealer in my industry so I am using their products for this job. The joint is to small to allow for backer rod. Fill the joint, dry tool it, then take a single edge...

That is what I have, (Signature Series) very good product. I also own B&W, another good product. The Reese system is much cleaner with GM fender liners, you can't see the mount. No levers to pull from inside the rear tire, or ugly notches in the fender liner. B&W has a terrific reputation with...

Our Aluminum Glass haulers, Enclosed trailers, shop trucks.

What you said makes a ton of sense, that math stuff works every time in the right hands.

I own both a Fifth Wheel Jayco camper, and an Enclosed Gooseneck trailer. I don't fully understand your post, what is a anti sway Fifth Wheel hitch? Do you have pictures of what you are using? I would use a gooseneck for any type of construction trailer as you described. Fifth Wheels are easier...

Just got done building a room for a new pressure washer at the shop. The unit is a Natural Gas, Electric Hotsy.

One of inside my Glass shop

Their used on roof applications with OSB a lot of the time. You would see the staple even painted more than a nail. I would nail it.

Good point, over 30' wide I would look at Pre-Engineered Steel.

We went all Hilti fleet to stop the crazy games like this. They are pushing the fleet big time, it will equal out about the same as replacing tools, and batteries routinely.

I just finished building a wash room for a pressure washer at my shop. Before this new building I had a 3000 psi Honda unit 2.9 gpm from Tractor Supply. That unit is very easy starting, and does a nice job, everything a home owner would need.