Recent content by GMBracing

I think you compressor would not be happy if it tried to start and run on one leg, which it will try when it calls for pressure

zim have a pair of bifocal glasses built upside down so that when i work under a dash board i can see without cranking my neck out of shape

why not just add a switch to "jump start" the thermostat when you want to heat up mthe area. turn on switch it will start the boiler and when it gets above 35 deg turn the switch off and let the tstat do its job it you want it could be a spring type timer that you turn on for the start, them...

use a hot knife to seal the edge as you go or after you cut it seal it with something like a soldering iron

I have a zone off the furnace run into the attached garage, I keep the thermostat at 50 works real well and has the ability to heat the 26x42 space to 65 in about 30 min

measure your voltage under load, the spider box could have a flakey connection. when you draw current the voltage drops

sounds like a connection problem, check the wiring for tarnishing or bad connection

look at 600 ledgends race cars for inspiration or check out a modlite style car on racing junk .com

if you can look above ,locate the studs otherwise you just might need the drywall

what heat do you have in your house, if its hot water just add another zone and put a modine style heater in the upper corner. It keeps my 4 car space at 50 deg with out a problem and when I want to work out there I turn its thermostat up for a while. using a programmable thermostat It will...

telephone,

it's a drill stand for that old metal drill

how about a fountain pump like they use in a parts washer to pump water out of a tank

sent the parts chaser guy to the hardware store to ask the female clerk for "6 ft of fallopian tube"

what do you have for bulbs in the opener, I had cheap leds and cfls and the opener got intererence from them/ changed them to regular bulbs and no more problems