Recent content by hartattack

I have about 40 lbs of gray and white chips left over if any body is interested in purchasing

i put down my bondtite 1101 today and just finished checking on it. I cranked up the heat to about 84 deg and it seems to be hard in a few spots and a little sticky in others. Is it ok that it is cured in some spots? I will be applying the liquatile 24 hours after the bondtite.

My garage is 20x28 with new concrete and i used 6 gals. I tried using 3 to1 ratio and found it did not do much of anything. I ended up using a 1 to 1 ratio.

I started acid etching my floor last night. I mix it 1gal of acid to 3 gal of water, poured it out and spread with broom. I only had enough acid to do 1/2 of the floor. After i spread it all out i went to turn on the hose and rise it off and the hose was frozen! lol. So i had to let it dry. This...

Where would be a good place to purchase a passive vent. I looked on line and they said that passive vents do not close. Our winters are very cold and i would not a hole in the wall open all the time.

I am in the proses of building a closet around my wall mounted boiler system and my air compressor. I will be insulating and drywalling both sides of the wall. Also i am putting a insulated steel door on the closet so there is very little noise in the shop. My question is what is the best way to...

Dose any one have a picture of a red floor with black flake? Or white with heavier black flake?

I am wanting to purchase an epoxy floor coating this week. I thought i had decided on ucoat-it just like E46M3 did. I love the look of his floor and the price is good. Now i have been reading some move reviews and some are not having good luck with the product and are also saying it is a water...

Wow looks good! Is that an epoxy?

Iwas thinking of using this because its is free and then using a bondtite product on top so it is UV protected and has a nice shine. Also add some flake.

I plan on doing a epoxy floor in my garage. I was telling a friend about it tonight and he says he has a bunch of 2 part epoxy paint used to paint pools. He says i can have it for free and that if the stuff can last 15 years under water it should work fine on my garage floor. Has anyone used...

I would like to see what every one has done for cabinets in there garage!

My garage is 20x28 with 9' ceilings. I have 24 6" can fixtures and i am going to use cfl bulbs. What watt of bulb should i go with? Is 40 watt 150 equal to much light or not enough per fixture? Any help would be great!!! my original plan was to use 6 2'x4' T8 4 bulb recessed fixtures but went...

anyone????

I have a 20x28 shop with 9' ceilings. I installed 24 6" recessed cans. The fixture says max 75 watts. What bulbs should i use for the best and most light? I installed some 85 watt 6" indoor flood bulbs in half of the lights and am not happy with the amount of light.