JABgj's latest activity
-
JJABgj replied to the thread Question for machinist.Could the stud be stretched from use making it bind up?
-
JJABgj replied to the thread 1/4" Hex Bit Mini Ratchet Options (Mac, Matco, etc.).This is from Klein. Pretty low profile and the ring end lets you use a fingertip to operate. Also has a spinner on the head.
-
-
JJABgj replied to the thread I think my garage door is sticking to the seal.The door faces west and it cooks all day long. The seal is soft enough to seal, but it does look weathered. I believe it's the top and...
-
JJABgj reacted to r00a005's post in the thread I think my garage door is sticking to the seal with
Like.
I tried silicon first, didn't work. Had to replace the seals. It also seems that with doors in direct sunlight , the seals fail sooner -
JJABgj posted the thread I think my garage door is sticking to the seal in General Garage Discussion.This is a 2 car garage with a sectional door. When the door is raised, it does open, but with a noise. My guess the seal is sticking to...
-
-
JI hated changing the oil in my compressor so I just made this setup which makes it easy. A right angle brass airline fitting Short drain...
-
JJABgj replied to the thread Innova 5610 – WIN YOURS NOW!.I'm in as well. Thanks
-
JI disassembled the Wilton 60 and my small Wilton. After masking all the machined surfaces I glass bead blasted the parts, primed them...
-
J@NUTTSGT boy does this quote bring back a memory. About 2014 (a year before I retired) I was walking thru the halls of Engineering...
-
JJABgj replied to the thread bathroom sink - ****** threads in bad shape - options?.The Fernco was a great find as I had no room to swing a pipe wrench big enough to maybe break loose a 40 plus year old connection. So...
-
JJABgj reacted to stickshift's post in the thread bathroom sink - ****** threads in bad shape - options? with Like.
Oh, I think I get it now. You're saying cut off threads, then install a ****** into whatever this old ****** used to be threaded into...
-
JJABgj reacted to stickshift's post in the thread bathroom sink - ****** threads in bad shape - options? with Like.
Yeah, I think better to go the low risk route and get this done rather than risk turning this into a larger project. Looks like this is...
-
JJABgj replied to the thread bathroom sink - ****** threads in bad shape - options?.Found myself in a similar spot. Messed up threads and the fitting was not likely to budge (didn't try) found a rubber sleeve at the box...
-
