Recent content by jimbee

I have a Milton S-921 in every car I own.

Modern alkaline dry cells are prone to leaks. For anything critical I use lithium.

I also recommend the UT210E. I've had one for a few years, and I'm happy with it. You can find it on ebay for about $38.

How about Klein for $48? https://www.homedepot.com/p/Klein-Tools-Screwdriver-Set-Plus-Magnetizer-Cushion-Grip-6-Piece-85146/310970853

The circuits in the Pro/Tran transfer box would normally be set to generator(inverter) feed. Analogous to the "A" position the 100 Amp Manual Transfer Switch in your diagram.

If you're sure how many circuits you want to back up (don't want to add any in the future), these units from Reliance Controls perform that function all-in-one. Unless you don't want to individually switch each load. Just connect the inverter via the generator connection. Integrates the function...

As engineer2 indicated Liftmaster is Chamberlain.

Like Jeep?

Not really that quick, almost three years ago.

Great discussion, I learned some good information. Thank you.

Gsmith22 gave good advice. Use some of the salt you use in your softener to recharge the CR Spotless resin in a five gallon bucket. After soaking an hour or so, pour off the brine and add fresh, softened water to rinse the resin. Give it a couple of rinses. For long term use, add a hose bib...

There can be a lot of overlap in the response curves of molded case circuit breakers. Coordination of circuit breakers with nominal trip ratings that are close can be almost impossible.

It is. I've used a Deltran Battery Tender Plus for the last twelve winters to keep my summer car's battery maintained in my unheated garage, with no problems. I leave it connected and energized continuously. The Battery Tender Jr should also work (I have one of those, too). The Tender Plus may...