Recent content by just a noob

I only put wires in l1 and l2, l3 was installed when I got it. I put a 60 amp breaker in the main box and used 6 awg cable. The panel is probably 3 feet away from the main breaker box, the compressor is about 2 feet away from the disconnect.

Exactly what I did. I didn’t want to be that ******* that burned down his own shop :thumbup:

Thanks a lot, this has had me stumped.

I’m in need of some assistance, I bought a new Champion VRV7F with a 7.5 hp motor. It’s 220v single phase. I haven’t had to deal with much a/c wiring before. I’m mostly wondering what to do with the white neutral wire. Does that just get hooked to the ground with the motor? I’ve attached an...

I think the issue you'll run in to is the oil. Usually it absorbs moisture out of the air and turns acidic, and that ruins the compressor.

https://www.amazon.com/gp/product/B002JGTWF2/?tag=atomicindus08-20 I bought this one for removing stubborn bolts on Gehl drive motors

It seems to depend on how hard the insulation is on the wire you want to strip. The jaws start to open during the strip, I have this and I think it works better. It is an import though, and the Knipex is made in Germany. I'm talking about the wire strippers though, not sure how the wife...

like this? I use mine so I don't smash my knuckles on skidloaders

It weighs 900 lbs empty with drawers, but I don't know how much the drawers add to the weight on a big box. On the smaller boxes I've dealt with it was probably 3/4 the box weight. I think if you could get a couple of people with strong backs to go with you it would be a pretty safe bet.

Still need to clean it and put a coat of wax on it

Made in Germany, missing the pieces to hold the grinding wheel though. I'll have to see if the Milwaukee grinder pieces will work because the Bosch pieces are kind of pricey.

I like the hutch because I can just lock up all the **** I throw on top of the box :D.

I have a couple in the new instinct style but they're for a smaller file. No idea what the part number is offhand, but I do remember it was just a "G" for the color.