Recent content by kaje36

  1. K

    Dirt Cheap Welding Table Clamps

    Wesley Treat does some fantastic work! He is also a lot of fun to watch! I am working on a design for my own welding table, I didn't go with the Certi-flat top, Just 3/8th thick that you see in my videos. but I will be copying some of his retractable caster design, along with some tank holders...
  2. K

    Dirt Cheap Welding Table Clamps

    Looks like you already knew about these! they look almost exactly the same! The Shop press isn't much special, just a 20 ton HF press, with a Swag off-road nob. I am curious to hear more about your clamps!
  3. K

    Dirt Cheap Welding Table Clamps

    Thanks for fixing the Link for me guys! I apparently need a bit more sleep!
  4. K

    Dirt Cheap Welding Table Clamps

    I recently made some welding table clamps for less than $4 that I really enjoy. It only took a few minutes per clamp to make, and all you really need is a grinder, and a welder! I bet you could even use these on a wood workbench to clamp down any other projects you guys might have! Dirt Cheap...
  5. K

    How to hang your breaker bars

    Thank you Everyone, I feel the same way about most videos! I really try to keep all my videos under 5 minutes, unless there is a good reason! I got the table from SWAG offroad V3, (http://www.swagoffroad.com/SWAG-Portaband-Tables-Accessories_c_35.html Works well, and has a thumb screw, so the...
  6. K

    The VISES of Garage Journal

    Nope, not at all, Learning every video I make, watch my first video at your own risk, But I enjoy it and want to make a lot more!
  7. K

    Modifying garage door to follow roof pitch

    Thank you! it did take a bit longer than I wanted, but not bad for never even installing a garage door before. It was very satisfying to do! But you are right.., my local garage door people had no problem installing this type of setup.. if the manufacture did all the work calculating pulleys...
  8. K

    Best tool purchase this year?

    Lift would be my best purchase ever($500 for a 90's era rotory) But my best purchase this year, was a HF portable band-saw, and a SWAG off-road stand. best of both worlds,The precision and finesse of a vertical band-saw and one thumb screw, and its portable again. No more crazy imprecise cuts...
  9. K

    How to hang your breaker bars

    I had a pile of breaker bars and torque wrenches in a pile on my work bench for the last year, they didn't easily fit in my toolboxes, without displacing other tools, so I spent a while trying to figure out a good place to hang them.. and how I should hang them, and I settled on this! I hope...
  10. K

    The VISES of Garage Journal

    Here is one of My Vises. I recently got it in a going out of business sale for cheap. it just needed a bit of Love, and I think it came out great! Here is the tear down. And what you wall want to see, The rebuild! I ended up coating it in Raptor bedliner, so it can really take some abuse!.
  11. K

    Modifying garage door to follow roof pitch

    Recently I decided my center 9x7 garage door were WAY to small. I cant drive my tractor in with the ROPS up, and I had a truck I couldn't drive in because of the lights on the roof! So I found a replacement door for one side of my garage, and use one of the extra panels to extend the center...
  12. K

    Raptor bed-liner as a garage floor coating

    You can mix an aggregate into the Raptor that would work well for you. I have seen a few different type of aggregate for different applications. I didn't have any aggregate, and it isn't the best when VERY wet, but not horrible either.
  13. K

    Raptor bed-liner as a garage floor coating

    For the most part its doing well. I have been renting out the garage to a local mechanic friend, so the floor has been eternally dirty. It seems to be holding up well, with having engines and transmission dragged across it unprotected. he abuses the hell out of it! Also the concrete, before I...
  14. K

    Rotary SPOA7 - Price check

    I paid $500 for my SPOA9, sure its a little rusty on the arms, but it works perfectly otherwise!
  15. K

    Lets see your workbench

    I am still working on mine,.. plan on doing a writeup of the garage once I get a little more done, but here is a teaser! I plan on getting some hardwood flooring to top the counters, and still got some more wall cabinets to install, I got to put the doors on the lowers, and put stuff in them...
Top Bottom