Recent content by madbasser

The lead screw is held in by what should look like a crown nut with Two of the prongs bent in. To remove you will have to drill out the bent prongs and slide it out. If the crown nut does not have any more prongs I would not do it as those are impossible to find new. Now the top pin is just...

Try putting a bead of gray RTV and and letting it dry for quite a while then reattach the piece. Worth a shot anyways.

I say clean it up and run it!! I have seen those pumps at work and they run really hot. Looks maybe some ring wear and maybe some oil is leaking into the cylinder but the real way to know is run it and see if you oil in the tank when you dump the water out. It's just a compressor not a race...

FHLF80 no doubt!!

Zero offset long ratcheting wrenches are on my list. Half moons, S shaped, flex ratchets in all flavors is a must, I don't know what I ever did without a 1/4" flex, it's amazing my struggles have ceased!! And yes I poor little DIYer lol. Can always find a bigger compressor, media blaster is a...

If its your time it's your time. Falling on a pencil or drinking too much water can kill you. Even hydrolic lifts fail from time to time. Guess you can build your own bullet proof ones, or just take it in for the oil change.

Has anyone successfully used a HF regulator on a 2-stage compressor to regulate the 175psi tank pressure down to around 110psi for air tools, without any leaking issues? I have heard that these regs have trouble with the higher tank pressures of a2-stage compressor. If you have had a positive...

Isn't the "F" for flex?

Thats it. Looking for some Snappy Wrench rolls. 12 or 14 pockets. I need one for a metric and SAE set. Used is fine, as long as it still has some good life left. Not looking for anything with holes in it. PM me with price and pics, thanks. PS i also have 1" and 7/16 FD+ wrenches to trade if...

3$ yard sale find. What i find wierd is that is has the Script logo on the direction switch but the underlined logo on the handle?:dunno:

:spit::eyecrazy: Outlaw you are NOT nice!!! Those Primus Optimus backpackers stoves are absolutely irresistible :willy_nil:willy_nil :bowdown: They run on ANY type of fuel, anywhere man can place a step. Absolute perfection for any adventurer. No pumping, no canisters, indestructible and...

I go here: http://colemancollectorsforum.websitetoolbox.com/ And OOHH dear lord, this is the gods honest truth here.:thumbup: I have like 80+ lanterns and 40+ stoves and 1 very good wife LOL:rocker:

Buy the cheap HF one and weld a pipe to it if you need it longer. For 9$ who cares and should be stronger than you wrench your using now.

Ordered a fl80 from Franz and received it SUPER fast. Absolutely top notch seller. Great prices and arrived exactly as described, NO SURPRISES. :thumbup::thumbup:

I am looking for some snappy wrenches. Old underline logo welcomed. Looking for sizes 9/16, 5/16, 1/4 and 1". Let me know what u got thanks.