Recent content by markdtn

I found a torque wrench box being tossed at work. It's longer than I wanted but actually works pretty well. Thanks to all!

Can't speak for modern Kohler but Kawasaki would use thicker oil. On mine the recommended oil is 20W50 for 0 deg F to over 104F. (10W40 for -14F to a bit over 104F). If you use thinner oil you may have oil consumption issues. I would definitely chase down a manufacturers oil recommendation...

Thank you!

I have an M12 Fuel 3/8 ratchet. It is great! Accidentally dropped it in a lake 2 years ago. Took about 2 minutes to get it out. I let it sit for a month and it works good as ever. About a month ago I had a project changing pontoons on a boat. I removed around 100 1/4" bolts and put back...

My issue with HD website is that you can't click a button to show what is on hand in the store that day. I have to wade through all the stuff that they want to drop ship. Sometimes I need it right now. Lowes site is much better for this.

The Harbor Freight Icon or Amazon SMOTIVEPRO set looks like it has the perfect box for this. https://www.harborfreight.com/extended-reach-ratcheting-serpentine-belt-tool-kit-58396.html Here is a link to a set like mine...

I thought this would be easy, but I am finding that it is not. I bought a Blue Point serpentine belt tool kit. It is complete and in the plastic pouch. But the pouch is torn and coming apart so I would like to find a storage case for it. Ideal internal dimensions 18" long x 4" wide x 1"...

It is turned off before use. Thanks!

Yes, 2 hots and a neutral Yes, putting the supplied "curly wire" ("B" in the upper picture of instructions) and an additional wire from the center "N" post on the breaker both to the neutral bar. If you look at the instructions on the picture that is what it shows to me: -If you look at the...

Short story church building with a Square-D Homeline sub panel. Has a 30A double pole breaker with an inline GFCI on a baptistry heater. Over time the inline GFCI trips more and more, I think it has gotten weak and I don't like where the inline is located. So I bought a new 30A GFCI breaker...

I bought a set on Ebay so now I have 1.75 sets of pink picks.

If you are replacing both the evaporator and condensor why not just get a new system? 11 year old compressor is more than half gone as well as fan motors. Probably cheaper in the long run to just replace everything with new unless you plan to move really soon.

No dice so far. How about any SO mini pick in hard handle pink and I will just change the blade to right angle?

I have a pink pick set but I lost the right angle one years ago. I have a cheap orange one in there now but would like to find a proper pink one. Anybody out there got one to spare?