Recent content by MGmachine

They heat them because they are a glued mess from the factory. The rubber seals that keep the water out actually bond the plastic together and sometimes need heated to remove. The guy that did it probably heated the plastic and then pulled on the wires is why you had problems.

I live in NE Ohio as well and you are going to find that the construction field is not very professional around here, generally just a bunch of hillbillies that work concrete, and you are probably talking above their head. Try to find a concrete company that has a civil engineer as the head of...

Just remeber the puller is not designed to just zip off the arm with an impact. The puller applies tension while you hit the arm with a hammer to shock it off its tapered and indexed stud. If you try to zip it off with an impact it probably will just damage the puller and not remove the arm...

Yep, every month on the harbor freight digital savings website, has been for years. I use it for every purchase at HF right off my phone (no need to print). No need to dig into ******* and NRA magazines to find them lol

Great question. Even most professional mechanics use this tool incorrectly. The tool is not designed to force the stud out of the knuckle. It will do this on some cars, but not the purpose. The tool is designed to put pressure on the stud in the knuckle. While the pressure is applied hit...

I use the gear wench long metric professionally. No problems except the 13 and 15 are getting a little loose after 3 years of everyday use.

Fords are just tough to lift. I put them on my drive on if I have to be under them.

For the guy checking the run-out above, it looks like you have your dial indicator on a magnetic stand that is on a drive on lift? That is incorrect way to mount. How are you sure that your wheel assembly is straight? Your rotor should be secured with lugs and your magnetic base on the hub...

No. But I do have a tool of theirs that I bought, opened it up a few weeks later to use and the screen was DOA. My snapon dealer couldn't get them to warranty it through conventional means