Recent content by Mhardee86

No. Not yet. I've not had a chance to add to it. I do remember the last time it was used the front loader was sluggish. It would take a few sec for the loader to move once I messed with the levers

Thank you for the information. I checked where the hydraulic fluid goes into the frame for the front loader. It's no where close to 6-8in from the top. I would say 15-20 in from the top. The front loader may take a few seconds before it move while I'm controlling the lever for the front loader...

Thank you!

Share the cap on the left side of the frame #17

Please share the correct manual

I believe I was able to find it. Now how do I check and fill the fluid reservoir?

I'm having some issues with the hydraulic pump/controls on this backhoe. I'm not able to find much info online and would need help locating the pump and where to add more fluid. I also heard that instead of hydraulic fluid you can use brake fluid?? I believe the cap by the gear sticks are...

I was able to get new gasket and value from the link. The air compressor is now able to build pressure without issue. Thanks to all for the help! I also noticed that there's a build up of moisture when using any compressor head. I've let the water drain from the drain plug, but I'll get a...

Took the head off and these are the values

I don't hear any clicks or odd noises from the motor or pump

I don't hear any leaks. It's a u.s. general 3848. Unloader?

I recently had to rethread and replace the drain plug in a 60gal air compressor. I also noticed that the psi will not get above 40-45 lbs. I let it run for 30min but still wouldn't get above 45lbs. Can anyone help me out? It's been awhile since I was able to get this compressor running again...

Pictures are attached