Recent content by mromgcorey

I recently had an 8x10 shed built with lp prostruct flooring. I'm using the shed to store lawn equipment and anything else that may track in dirt or oil. Is there a particular way to protect this type of floor or make it easier to clean? Perhaps Vinyl mats or a polyurethane coating would suffice?

If I use the Ditra, do I still need to put down redguard on the cracks?

Is the ditra necessary? I'm working with a new slab that is close to perfect condition. At the garage entry, there’s about a 1.5-inch height difference going into the garage. I found this trim...

The house is less than 6 months old. I live in texas so the heated floor won't be necessary. I'll make sure I get stainless steel for the edges. For the garage entry, how do I decide what size schluter to use?

I’m planning to tile my garage (about 700 sq ft) with porcelain, 9.39 mm (3/8") thick, and want to make sure I get this right since cars will be driving and parking on it from time to time. Thinset – I'm thinking I will go with Laticrete 254 Platinum or Mapei ultraflex LFT. Schluter/edges –...

Is there a goto thinset or grout to use for this sort of project? I live in houston and am wanting to do this to a new home. Is redgaurd the only thing I'll need to roll on before I put thinset on?

I'm in the process of doing the floor in my garage and porcelain tile is on top of the list. I'm looking to see what color tile I want to go with and i'm having a hard time finding examples. If you have tile in your garage, please post it here. Thanks

Let me make sure I understand this correctly. If I use closed cell, I can leave everything like it is as long as they don't seal everything off. If I use open cell, I have to seal everything off? I don't have any reason to make the attic a conditioned space. I'm just looking at my options to...

I was considering spraying the roof deck. I never considered actually spraying the floor. If I spray everything with closed cell, I can leave the soffit how they are?

I got a 684 Sq ft garage that's about 20x30 and 8 ft tall. It has its own attic separated from the house. The house is spray foamed in the attic. The garage attic has nothing. I currently have a 24k senville keeping the garage at 80 degrees and I'm looking to get it down to 70 in the texas...

How tall is your shop? And the insulation

R 15 20x30

I'm in Texas. 700 Sq ft garage. 8 ft height. Not insulated yet but will be.

I’m planning to install a mini split in my garage and could use some advice on the best place to mount the indoor unit. Inside the garage, I have two options: Mount it near the water heater, which is closer to the electrical panel. Or mount it in the middle of the garage, just to the right of...

I’m finally getting around to insulating my garage door with rigid foam board, but I’ve run into an issue I haven’t seen mentioned anywhere. Some of the panels have hinge bolts sticking out, and they’re in the way of the insulation sitting flush. I’ve done a fair bit of research and watched a...