Recent content by nosnownogo

shaune i had a Tempo brand shelter for 19 years (the grey colored poly tarp material)it was installed in october and removed april for 17 years except it was there for the last two years. I sold the frame to a person that wanted to enlarge his shelter .The grey tarp never tore but year 19 the...

Try DSL Dam Small Linux no hard drive required just boot from cd

At work we use a snap growler armature tester to demagnetize parts before assembly .They bought a brand new unit and cut off all the electrical probe leads . '

his is a low cost solutio from romania http://www.youtube.com/watch?feature=player_embedded&v=MZIlNb4KIRk

We had some clowns at work trying to torque fasteners with a snapon dial type torque wrench 0 to 50 inch pounds .The torque required was 85 .So they would torque to 50 , and continue holding the tension then reset the dial to 0 and crank another 35 .These must be the same people who use...

http://cssportal.css-club.net/honda/PowerProducts/TERMS010.aspx another site

http://www.honda-engines-eu.com/en/welcome.html partial service manual goto service pulldown then service information pulldown you will see shop manual link on the page

try a place that services fire extinguishers ( co2 )

Did you know that 85% of harleys made are still on the road today!!! And the other 15% made it home!!!!

nice work nasty . Hope you and your family did not endure any damage in the microburst

quick view

where i work there are some modified with a yoke for the puller to draw in a straight line with the jaw teeth . Some hardened pins tend to snap off. The rivet (pivot) is removed and the yoke is installed with a new longer rivet

my dogs tig bolt and bendix

i wore out the cam contact points and the contact face of the chuck (500 plus drills) on a drill doctor dd500x . Now the drills don't have the proper profile .

Looks something like this Penens corp. The speed handle also has Challenger stamped after the penens corp name