PopcornSutton's latest activity

do yourself a favor when using something that sensitive, get the lathe leveled out with a less sensitive level first, that way at least...

That metal roof will be going strong when asphalt is dried up. But these maintenance things need to be kept up. Many believe screws...

A properly installed metal roof is probably the best option out there.I’ve made my living for thirty years going behind hacks and...

My game is chambering barrels. Once the bed is aligned, I take pains to get the tailstock in alignment with the headstock. Fore and aft...

When I check my lathe, I mark the bed where the level sits the the position of the level, across the bed, on each end. I don't look for...

Diagonal braces on the inside of the framed unsheathed wall. Install a brace in the middle of the length on both sides to insure the...

I don't think I could nail framing for very long anymore. I put new shingles on a couple sheds a few years ago and invested in a roofing...

At 4+ years, I'll bet you need the coil to be cleaned. I'm north of the DFW area and we're reaching the point that even with a filter...

I've seen Hilti expansion anchors installed in cored holes many times. Give them a call and ask.

I changed out my whole heatpump system after 13 years of use, new air handler new condenser new lines. I changed filters regularly. I...

Looks like you can drill under the #7 horizontal bars, which is the strength of the beam. Drill at 3' centers you'll hit a few bands...