rattle_snake's latest activity
-
Rrattle_snake replied to the thread rattle_snake's random shop projects v0.1.Pulled the motor back out last night to deal with the oil pan. Waffled on separating trans and putting engine on the stand. Ended up...
-
Rrattle_snake replied to the thread rattle_snake's random shop projects v0.1.That was ruff stuff's name for them. RS is gone, now it's 'Riley Mountain'. NVH is the theme of the truck. The poly bushings aren't...
-
Rrattle_snake replied to the thread Some of Bodj Built's builds.Ah one of those types.... :cool:
-
Rrattle_snake replied to the thread rattle_snake's random shop projects v0.1.Thanks! It came out pretty decent for only a few hours work.
-
Rrattle_snake replied to the thread rattle_snake's random shop projects v0.1.Decided to tackle the poor fitting header before the oil pan or motor mounts. These are cheap 302 headers for a 'Ford truck', not a 2WD...
-
-
Rrattle_snake replied to the thread rattle_snake's random shop projects v0.1.Thanks Mike. I enjoy this part of the build. Taking the time to do it right not rush things. Thank you. Do you mean the ends of the...
-
Rrattle_snake replied to the thread Some of Bodj Built's builds.Ah Ok so some additional thing with the motor. Are the exhaust manifolds/riser rusted or otherwise not usable? Does it have a closed...
-
Rrattle_snake replied to the thread 120v vfd for 3 phase.I have the same VFD on a GFI and it has never tripped. A VFD can perform a transformer type function, similar to a 'solid state...
-
Rrattle_snake replied to the thread Some of Bodj Built's builds.Broken starter mount is a bummer. I'm assuming that it can't really be repaired well enough to trust? Tie into the drive bellhousing...
-
Rrattle_snake replied to the thread rattle_snake's random shop projects v0.1.Designed some motor mounts in CAD. New plasma can cut slots and holes much better, so did a slot/tab design. Offset the bushing away...
-
-
Rrattle_snake replied to the thread rattle_snake's random shop projects v0.1.Received bushed sleeves from Barns. Made some custom sized washers Got the motor put into rough position to start on mounts. I...
-
-
Rrattle_snake replied to the thread rattle_snake's random shop projects v0.1.Made some progress on the chassis. Got the upper bracketry welded up while the k-member was still in place. Then removed it to access...
-
-
Rrattle_snake replied to the thread rattle_snake's random shop projects v0.1.Thanks Smokey. New plasma machine makes things look better.
-
Rrattle_snake replied to the thread ZMotorsports Shop Projects 2.0.My neighbor runs RCVs on this highly modified Tacoma. The truck is only used for overlanding/offroad, so it doesn't get a lot of miles...
-
Rrattle_snake replied to the thread rattle_snake's random shop projects v0.1.Looks like they started in '03. Somehow that is now 23 years ago. I though of doing it that way similar to doing a **** splice on...
