Relax's latest activity

Stubby Metric Hex, Torx, and Triple Square sockets are on sale for $24.99...

I would forget about the battery powered impact and look for a 12V wired one that plugs into the lighter or clamps on to the battery...

According to the manufacturer, it's supposed to be regular gear oil. Someone else has definitely been in there since it came out of the...

Camera angle, probably because of the beveled edge and concave teeth.

The bad news is after all that, the upper bearing is fine! Haven't removed the shaft to inspect the lower bearing, but opening this up...

I've got some good news and some bad news... The good news is I got the case apart. @PCustoms recommendation to use a credit card...

That could be an option, but it would be a last resort. The holes aren't tapped at all on either side of the case - the bolt goes...

can you tap the thru holes to a thread that could push on a stud in the original threaded hole . apply some pressure to help push it...

Funny as I was reading this is exactly what I was going to suggest. Slip a card in that gap and keep working it. Once your partway...

Decided to brute force it with a razor blade and gently hammering. This will take a while. Based on how much extra sealant oozed out...

Run-flat tires would be my choice instead of a air compressor.

Spend the money on a more reliable car with better tires and add road service to her car insurance. My money says she’ll never use...

The first thing I'd do to prepare her for a potential wheel change is to make sure the wheels are properly torqued to the...

The tire changer needs new bearings (actually needs a new top case half since it's cracked, but that's another problem). Ranger says...

The battery is wider than the space between the runways, so it can't be dropped down and rolled out forward. And because of my garage...