Recent content by rinconnick

My building only has r-9 insulation on walls and ceiling and has 7 windows. Would the 50 be enough? I always thought it was good to go bigger?

After reading a bunch of post about overcycling of large heaters if I should go with a 50,000btu

DO either of those options require a inline pressure regulator?

It will only be heated on the weekends. I have looked at hanging natural gas heater such as the mr.heater 80,000btu or the hot dawg 75. both are affordable options. Trying to stay away from wood heat.

I recently completed a 30x40 pole barn. What options are there for heating? I live in Kentucky and will only heat on the weekends.

My height at the eave is 12’6”. The truss is another 6-7 inches above that Sent from my iPhone using The Garage Journal mobile app

I need 11 feet on the outside to park my camper underneath it. Sent from my iPhone using The Garage Journal mobile app

Its a 14 foot lean to. I plan to use 2x10 for the rafters. It will be a metal roof.

Should have went taller with the building but contractor had post concreted before I could change it.

I am building a 30x40 pole barn with a 4/12 pitch roof. To get the clearance I want in the lean to's I am going to be at like a 1.5/12 pitch is the ok or a little low?

I will be running an Arc welder, compressor with 5hp motor, refrigerator and general lights and garage doors.

I want to run a subpanel to my garage. It is about 220 feet from my house. What size wire should I run with a 100 amp breaker in my house breaker box?

When I posted this I didn’t realize there where a hundred and of the same topics already on the forum. Thanks for input guys

I plan on running 2-2-2-4 mhf from my house 200amp service with a 90 amp breaker. The distance is about 200 feet from my house and want to run a 90 amp breaker in the subpanel. Does this sound correct at all?