Recent content by robmick

Bump

Looking for the following S&k-1/2 in dr 6 pt shallow impact 3/4,7/8,15/16,1(model 46124,46128,46130,46132)Preferably not newer looking for older like 70s era to complete set I inherited. Craftsman V series (with the part number stamped on it) 12 pt shallow 1/2 drive 47503-9/16 47505-5/8...

I want to find a kit i know i probably wont find a bonney,but it looks like it would be similar to quite a few ratchets.its a round head style 36 teeth in the head. The anvil was fine but the mechanism is froze up. After takkng apart i had a tiny bent spring fall out from the inside and it has...

Sorry if it double posts Ign im far from unwilling to get the right tool.if you dont mind actually can you post or pm your fp ring tool,cooling adaptors,and pressure tester brand and model numbers. Thanks Rob

I do not have a pressure tester,i wouldnt say super specialized but multi use like the fuel pump retainer tool,the axle nut size i am gonna get. My 1500 just hit 94k and had to replace the calipers and next is the drums and assmebly in rear.i have a master torx set wirh tamper proof as well.

Clidebarger my 1500 has drums in the back,ill keep in mind about the studs for the exhaust manis but, when i get the 2500 it will be the 6.6 whether or not its a gasser or diesel.havent quite decided still comparing the costs and what all ill be towing/doing if the diesel is worth it in my case...

So i currently have a 2010 silverado 5.3 1500.i got a decent set of tools mostly craftsman usa stuff with snap on for some ratchets and gearwrench for my ratcheting wrenches and mid length sockets.wrenches go from 6-25mm and 1/4-1 inch.sockets i got shallow and deep 1/4 3/8 and 1/2 drive.now...

Inherited an ace super set.missing a few taps on the smaller side.also got 2 drill indexes both about half full of bits.will be going through to see what ones are there and see if i can tell what kind of material they are.probably will replace the missing taps with irwin.they seem to sell the...

So short version old head was the type without the bump feed.took the precut lengths and you feed them through.but after years of use it wore down past the holes and is no longer usable.my uncle gave me one of those 3 blade universal heads for free but its meant for a threaded shaft.this shaft...

I'm a little old probably I'm 31 and I haven't looking into that yet that's a good idea.

So I've been tossing the idea around for a year or so now.what recommendations do you guys have for schooling and what not.im in western pa and I can pick things up real fast and electrical things have always interested me.ive done your basic home owner tasks like outlet changes and switch...

91062 -3 1/4 in 5.5 amp drill master electric planer--pass only have used it to fix a butchered door bottom at the new house. But I will second and third and whatever the 1/2 breaker bar and torque wrenches all solid pass.

Thank you for the quick replys.I couldn't quite wrap my head around the whole no more than 25' x3/8. My garage it will be living in is not all that big 24x30 so the 50 would fit my needs pretty good.As bobcatdan said and I agree with I would rather have 50' of air hose then 50' of extension cord.

Hello all,I just picked up a husky 20 gal compressor. 1.5 hp 5.0 scfm@40 4.0 scfm@90 and max 150 psi.Girlfriend bought me the 4 piece airtool set that husky makes diy level impact gun, air ratchet,1/4 straight die grinder and an air hammer.I grabbed a 50' 3/8 hybrid hose.As I was installing the...

Have not posted many if at all of my purchases in to this thread.I will say first thanks for honest reviews of things,second damn you all for feeding the addiction.Lets start First with the Torque wrench Craftsman 47711 I think an older model 3/8 digital torque wrench for 30$ on clearance.Says...