Recent content by RYS

I have some SK wrenchs from when I was 12 or 13.

Yes, it heats it well. Mine is 24' x 40' and the heater tube is 30' and runs down the 40' wall side about 6' from the wall. With the deflector angled it heats it pretty evenly throughout. My work bench is right under the heater and does not get to hot when working there. It is a little...

Only if your heater is to close. Read the owner manual. I store a couple collector cars in mine. Not an issue, but I made sure mine was installed correctly so that everything away the proper distance away.

Depends on the size of your shop. Mine is 1000 sq ft and my radiant specialist told me it was not needed for the size. The smaller the size the more important it is.

Very true. I think my heater says to keep it at least 42" from an combustable material. You have to have the deflector shield between the heater tube and the ceiling.

Get a "narrow" lift like the PP said (7') Most company make them. That is what I'm going to get someday.

Mine is an Omega II. I know mine was under $1100 for the complete kit (30 feet) without the propane tank. Took a buddy and I one evening to install it. Pretty simple to install. I bought mine from Bishop Radiant Heating in Omaha, NE.

Re: How many ratchets do you own ? probably about 15.

Yes I have a separate 500 gal propane tank for shop only - lasts two years on a single fill. The heat is great through out my shop and as you can see in the picture - it is off to one side. My main bench is right under it as you can see in one of the pictures. I keep it about 60 degrees so I...

New to this forum. Looks interesting. I have 24 x 40 shop with 9' ceilings. I have 75,000 BTU 30' radiant tube propane heater & I love it. I keep it about 60 degrees in the winter. Here is a couple pictures.