Recent content by skylar1692

I have seen flanges in much worse condition that are still useable. It is much easier to raise the height of the flange than to lower it. I agree with PugetDude, either use a self leveling cement or maybe even dry pack cement which is more forgiving if you have not done this type of work...

What about using a surfacing Wheel or abrasive Wheel on the grinder?

I had grinder first because not all cracks were visible when I did my floor. I used the Edco dual head diamond grinder over the whole floor. The opened up the cracks. Then blew out the cracks with compressed air and filled with the two part epoxy crack filler. Let that dry completely and I...

Easiest way I see would be to snap a chalk line 1/2" or so back from where it is spalling and use a 4" grinder with a diamond blade and just remove that 1/2" piece the width of the garage. If you are trying to maintain that exact line you will need to remove all the patch work and use a bonding...

http://www.garagejournal.com/forum/showthread.php?t=94169 I have a neighbor who bought the Versa Roll product and that's what made me want to use an epoxy or full broadcast system. I believe my neighbor got his versa roll at Sam's Club. It looks just ok, if that's what your going for. Plus he...

Maybe look into Sika products such as their Sika Bond Moisture Barrier to use before epoxy flooring or some of the Westcoat systems which utilize a polymer or sand base to allow moisture to breath or escape the floor. Maybe something like a Redgard product which is a waterproofing for shower...

Thanks! My ultimate goal is to get it all cleaned out so it's actually usable as a garage for storage of all my tools and as a clean working area where I can have my girls in there helping with projects. Do you guys have any recommendations for Heavy duty reasonably priced garage cabinets? I'm...

The doors still need another coat...

Okay, so I've been pretty busy and haven't had a chance to give an update. So the floor was prepped with the Edco dual head grinder. I then used my surface cleaner attachment for the pressure washer to remove all remaining residue and dust. I allowed the floor to dry for about 4 days with the...

Which product did you use if you don't mind me asking and how is it priced? Per square or linear foot? Thanks.

Hey all, I'm a long time lurker of this site, first time posting. I know this topic has been discussed to death so I'll try and keep it short and to the point. I have a 400 square foot garage that I have prepped with an Edco dual head machine. (There were about 5 coats of various colors that...