Snip's's latest activity

Can't tell from your photo, but it looks like the upper wheel is missing the urethane bandsaw tire... That and there should be a tension...

Workpiece clamp... Used to prevent the drill bit from grabbing the part and becoming a Craftsman Bass-O-Matic blender... Here's mine...

At quitting time at the shop after the guys left for home, I'd always walk back to the welding area and check the welding bottles...

Packard Craftsman Motor 115.6963 - Part 4, Cleaning the Stator Cover Band This stator cover band has some light to moderate rust...

Not if you're good at what you do. I've never had a failure in all the 150mph cars I've wired. Zim

I replaced all my shop faucets with T&S Brass, sourced from McMaster-Carr... Still running drip free for over 25 years now...

T&S Brass "Eterna" line. I've replaced damned near every faucet in the brewery and pub with them. Easy to source, inexpensive parts--and...

Had a buddy come by and lend a hand got the mill and lathe off the floor. They are being rehomed. Probably fab a couple 4x4s to go under...

DP#152 - Part 15, Installing the Head Frame Assembly It's time to install the head frame onto the column. I started by degreasing the...

I've never had a great experience at Lowes. Menards on the other hand is unbeatable for warranty and returns.

Makes working on my MINI a breeze... Depending on which end I'm working on I'll position my wood ramp blocks under the wheels for...

Worked on the JD garden tractor yesterday... The ignition switch was being temperamental... Original 40 YO switch... Tight space with my...

Looking at he size of that drive drum on the motor... I bet that belt flys...

Thanks! :beer: I think this advice is more suitable for those who drive inside these cars. :) :beer: Thanks! You're absolutely right...