Recent content by socalboy

Fire extinguisher

Oh, and I've got 6 in a 135 sq ft room, and have the dimmer preset to turn on to the halfway point to provide normal illumination, so you'll definitely want a dimmer for 6 cans per 100 sq ft.

We love our Cree CR4s that we have in our Halo H995ICAT cans; have them on Lutron Maestro dimmers and they dim wonderfully and put out a lot of light. CRI is 90 at 2700K. Our CR4 bulbs are the GU24 base (CA Title 24 compliant) so we had to cut off the connector in the can and use the pigtail...

Might just depend on the Home Depot where you live but my local store carries 6000 series masks in several different pre-bundled configurations: http://www.homedepot.com/p/3M-Mold-and-Lead-Particle-Respirator-in-Medium-1-Each-per-Pack-6297PA1-A/202078789...

I suspect you are correct. No kidding. Is there even a safe and code compliant way to power a wall oven like this from a 2-wire feed intended for an A/C compressor/condenser? I can't imagine one, and think we will need a new four wire pull from the panel...

It is indeed a #12 THHN/THWN ground wire, but for a different circuit and in a separate conduit. There is a transparent (but yellowing) plastic layer on the outside of the insulation which is abraded and peeling, which I believe is what you see in the photo.

Remainder of pictures Here are the rest of the pictures.

So, today as I went to retrieve some food out of the microwave, my hand happened to brush against the chrome trim on the wall oven while simultaneously touching the metallic door open button on the microwave, and I was greeted with a jolting electric shock! After calming down for a few seconds...

Test