Recent content by studmuffin

thanks, went ahead and used the Husky, everything went well. First time using a spray gun, but the cabinets look good.

Just got back from Lowes and Home Depot after picking up a couple of HVLP spray guns. This is the Home Depot gun, couldn't find a link for the Lowes Kobalt gun. http://www.homedepot.com/h_d1/N-5yc1vZ1xgg/R-100668721/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053 The Kobalt was...

SW says that all it needs is more time. They say I probably put it on to thick and that it will cure, it just takes longer and that the weather is not helping. They have not sent anyone out to look at it, they are just giving this advice over the phone. I told them I'll give it a little...

I called SW yesterday, they are going to send out a rep. I'll let you know what they say. I don't know how the ratio could have been wrong, it was just a matter of emptying the cans into the bucket, no measuring.

As far as I know, it was not a 100% solids. I mixed both coats as per instructions (three minutes or more, I went six) and I let it sit for 1 hour before applying. It does appear to be hardening a little more each day, but it has been more than a week now. The local weather is breaking, 65...

I finished my 25x25 detached garage last Wednesday with Sherwin Williams Tile Clad Product. I acid etched and then ground down the concrete followed by a pressure washer. After a couple of days of drying, and an overnight moisture test with a plastic sheet taped to the floor, I did one coat...

I built the garage myself and I know for sure there is no sealer on the slab. I think you have given me enough concern that I am going to go ahead and grind the floor. It looks like I'll be off to the local tool rental today. Thanks for the insight.

I just prepped my floor using a T.S.P. degreaser followed by muriatic acid. My floor is 9 years old but its an extra garage that hasn't seen any car storage, it does have a couple of oil stains from a lawnmower. What's the opinion on bypassing the grinding step and applying after only a...