Recent content by The Juggernaut

  1. T

    Garage addition....what to expect$$$

    The way I am doing the math Please let me know if I am making a mistake 20x20x6 thick which is 200 cubic feet 24"x24" footing x 56 liner foot 112 cubic feet 312 cubic feet divided by 27 equals almost 12 cubic yards Concrete is $105 a cubic yard so $1260 Figured $300 for lumber and rebar. Was...
  2. T

    Garage addition....what to expect$$$

    Called out multiple contractors. Over half never even came out. 3 showed up took measurements and then never to be heard from again Have 1 bid that is stupid high at $20k My theory is that there is soooo much work in the area, nobody wants to do it. On the house we are Having a roof put on and...
  3. T

    Garage addition....what to expect$$$

    The way I remember it labor was about equal to material cost. Obviously that would depend on what you are doing. Kitchens and bathrooms will usually have more material cost My thought was $10-11k for the work described. The drywall work, electrical work and the Garage door and install would be...
  4. T

    Garage addition....what to expect$$$

    I wanted to add a 20x20 addition to the back of my 24x20 detached garage. Basically slab, 3 walls and a roof. One wall will have a 8ft garage door opening. No interior work No drywall No electrical No door on 8ft opening I priced material out at roughly $3200 Concrete cost with forms and rebar...
  5. T

    Removing old tires from rims

    I have some rims with tires on them, and I would like to get the tires off so I can use the wheels for other projects. Most are just 15" steel wheels. A couple of dully wheels from a motor home ect. I don't want to spend $10 bucks a wheel if there is an easy way. I have about a dozen wheels to...
  6. T

    What type air hose when it touches solvents alot?

    Push-lok is the type of fitting I was referring to
  7. T

    What type air hose when it touches solvents alot?

    I would not trust the barbed fittings on just any hose. The hose we sell has a reinforced layer in the wall that keeps them from pulling out
  8. T

    What type air hose when it touches solvents alot?

    I sell fasteners chemicals ect. I also sell air hose. The best I have found https://www.winzerusa.com/?__event=browse_catalog&pid=4d8906a3dcb2f7c33e543a01 The thing I love about it is there are no clamps or ferrule It uses a special barbed fitting. Push it in and it stays. If you get a cut...
  9. T

    What to do with free rubber bushings

    Damn Pics Always post up side down
  10. T

    What to do with free rubber bushings

    1-3/16 tall 1-5/8 across @ the bottom 1-1/2 across @ the top (tapered)
  11. T

    Twist on Socket Rails

    The ones at Lowes(Torin) are a bit cheaper than most of the others
Top Bottom