Recent content by turbod7

I've gt a 30'x40' shop with 12' 7" ceilings. Walls are also 2x6" Insulated with R21 bats. I used osb on mine and used polyurethane caulk on the seams. Once its primed and painted it looks great! The walls aren't easily damaged and you can basically hang things anywhere. I put the bottom row of...

Random question, How far is your hoist from the wall? I have the same hoist and I'm trying to figure out placement. Thanks

You have to keep in mind with flourescent tubes some of the light is being directed up where as with the led tubes the light is all being directed down. So LEDs with less lumens tend to be brighter than their flourescent counterparts. Also with the removal of the ballasts the LEDs are more...

https://www.amazon.com/dp/B00W1DC2F0/?tag=atomicindus08-20 I just installed these in my garage with an almost 13' lid. After doing some reading about led tubes it was recommended that for ceilings over 12' 20w or higher be used. These are 22w and 2310 lumens. You almost need sunglasses it's so...

Here is a pic before I poured my floor.

Hey there! Just getting this as I haven't been on in awhile, I'll be posting some pics finally!

I have basically the same setup as you I have a 12" thickened edge that tapers up to 5" throughout. You want to make sure you insulate under the thickened edge then obviously under the slab itself, I used Owens Corning 2" foamular 250. I ran my wirsbo tubing basically right up to where the taper...

Hey all, stumbled upon this site while planning my new garage and looking for ideas on running water to it. Currently my garage is about half way done, I'm building a 30x40 detached garage with 12'6" ceilings. I've got 2 10'x10' garage doors on the front and an 8'x7' door on the side to get the...