Recent content by UCUDANT

Spark I only acid etched it, was a new floor in good shape and my friend the professional only aviced me of acid etching. I used a 1 part water to 3 parts acid. It goes on and fizz's turns greenish and thats about it. I saw a floor done in the standrd type (rustolium I think) it appeared very...

UPDATE coat 2 is down started at 10:05AM and finished about 12:00 the clean up took a few extra minutes. Today I wore latex gloves inside the leather gloves to help keep things neater . Floor was cured but just a tad tacky. I will let this coat cure all day and possibly add heat tonight to...

Actually application was simple. I am just a novice who wanted to get it right so i asked allot of questions. It's as simple as cleaning/etching the floor and mixing and rolling out the coating. It came nice too. It's tacking up well an should be ready for a second coat in the AM.

Thanks, so far I can't see the cracks that were repaired (I used a stone to smooth it over). Now I am not an expert but this seems like a pretty serious product. Nothing will get it off my hands, no amount of scrubbing, hand cleaner thinner or even Methol Ethol Keytone MEK. I tried to use latex...

Thanks for all the guidance, I coat it again tommorow this link will have pics http://board.moparts.org/ubbthreads/showflat.php?Cat=&Number=2186209&page=0&vc=1&PHPSESSID=1fffb66b8ff5cdac395154fa1a4ee093#Post2186209

I think I will look for the crack sealer tomorrow and get started. Then on to acid prep and eurothane. Hopefully it stays warm enough here (Albuquereque New Mexico)

I'm going to guess he spotted a few deer while working unarmed and decided he could afford to combine a few activities ? :lol:

Cool thanks, any recommendations for acid etching. I read a 1/3 phosphoric acid solution works?

Is Epoxy crack sealer compatable with eurothane coating? How large do cracks need to be to require attention/ or not before the top coat

I need to know how to seal the cracks in my garage floor prior to eurothaning it. I was told if the cracks are 1/8th or smaller not to worry. Do I need to bevel out the cracks with a grinder? What should I use to seal it and how long should it cure before I acid etch? Thanks

I was told to roll this stuff on and use two coats. One coat spinkled with sand for non skid (I preffer a smooth finish but don't want to slip if it ever gets wet) and a top coat Luckydevil its a standard 3 car garage but my Buddy hooked me up with more than I needed :bowdown: ZRWON can you...

I have aquired 15 gallons of industrial NEOGARD Urethane R 7442 for my garage floor and wanted to know is this a good product? It's indutrial grade. http://www.neogard.com/Flooring.htm Thanks

Hello a newbee here. I think the sprinkler and baking soda ideas are pretty smart. I was just going to try to keep my driveway wet. So a phosphoric acid product made for floors mixed to about 1 part water to 3 parts acid (or vice versa?) will help prep the floor but be less likey to streak the...

"Saw online that Sam's has Supercoat epoxy" Wow you all got sidetracked a little. Anyone know about product in question?