Recent content by YOHO

  1. Y

    Help: Grizzly 48" Box and Pan Sheet Metal Brake

    Okay that's what I was thinking. Thanks for your time and help!
  2. Y

    Help: Grizzly 48" Box and Pan Sheet Metal Brake

    Hey. Yes, definitely.
  3. Y

    Help: Grizzly 48" Box and Pan Sheet Metal Brake

  4. Y

    Help: Grizzly 48" Box and Pan Sheet Metal Brake

    Hi all. Recently picked up a Grizzly box and pan brake. Older model, but similar to the current Grizzly G0950. It is missing the front piece of angle iron on the apron. Anybody know what size of angle iron it is? Thanks
  5. Y

    Lenox Mobile Mitre Metal Bandsaw Help (Ellis Saw)

    Yes absolutely. Multiple pictures would be great and of the saw. I'm fixing a bunch of broken off/missing parts and don't really have good reference. Looks like there were several different iterations of Lenox Mobil Mitre/Ellis Model 90 over the years. I spoke to Ellis and they said the rear...
  6. Y

    Lenox Mobile Mitre Metal Bandsaw Help (Ellis Saw)

    Oh very helpful thanks! Does your saw have the counterweight spring below the motor?
  7. Y

    Motorized Bead Roller - Will this gear reduction motor work?

    Looks great. Finally working on mine!
  8. Y

    Motorized Bead Roller - Will this gear reduction motor work?

    Thanks for the details on the Mitler. Yep foot control is the plan. Thanks!
  9. Y

    Motorized Bead Roller - Will this gear reduction motor work?

    Thanks for the input. In response, I need at least 1/2 HP motor. The AC motor will have speed reduction down to 12-17 rpm through a gear reduction and then further with a VFD. I see this motor is listed as intermittent and class B insulation. Will I have any trouble with a VFD on this set up...
  10. Y

    Motorized Bead Roller - Will this gear reduction motor work?

    Any input on the quality of these motors and gear reducers? Thanks
  11. Y

    Motorized Bead Roller - Will this gear reduction motor work?

    Thanks for the replies. I'm not too sure on how much torque I need. Probably shooting for 5-7rpm, so half the rpm output from 12rpm coming out of the gear reduction. RTM: Sounds cool
  12. Y

    Motorized Bead Roller - Will this gear reduction motor work?

    I couldn't find any info on the motor itself. I'm curious too if a VFD would be acceptable to control it.
  13. Y

    Motorized Bead Roller - Will this gear reduction motor work?

    According to Marathon: Intermittent Duty – A motor that never reaches equilibrium temperature, but is permitted to cool down (to ambient temperature) between operations. For example, a crane, hoist or machine tool motor is often rated for 15, 30 or 60 minute duty.
  14. Y

    Motorized Bead Roller - Will this gear reduction motor work?

    Hi all! Planning to motorize my bead roller that I use on 16 gauge mild steel. Going the AC 3 phase motor route with gear reduction and VFD control. Ideally looking for a used 3 Phase 1/2HP or larger motor with a gear reduction of around 1:100 and then I plan to further slow it down/do speed...
  15. Y

    Beverly B2 Shear Knife Sharpening Help

    Yep
See more
Top Bottom