Show your new tool arrivals

[SouthernIllinois]

A like new HF brake a guy was selling cheap because he was moving.

I have some modifications in mind before I put it to use. I really just wanted it to help make floorpan patches for the Crusty Corvair.

The nearest HF is about an hour from me but it was on the way to pick up the brake so I stopped and came out with a set of snap-ring pliers and universal joints.

I really wanted the Snap-On snap-ring pliers. The set I was looking at retails for $178. I suspect I could get them for $160’ish paying cash but I don’t use them enough to justify Snap-On money.

 

[2001ZR2]

A like new HF brake a guy was selling cheap because he was moving.

I have some modifications in mind before I put it to use. I really just wanted to to help make floorpan patches for the Crusty Corvair.

The nearest HF is about an hour from me but it was on the way to pick up the brake so I stopped and came out with a set of snap-ring pliers and universal joints.

I really wanted the Snap-On snap-ring pliers. The set I was looking at retails for $178. I suspect I could get them for $160’ish paying cash but I don’t use them enough to justify Snap-On money.

There some who say that snsp ring set the tips are too large but I've never run into that working on my stuff. Maybe I need to expand my horizons but I've found them very useful.

 

[mikeinri]

A like new HF brake a guy was selling cheap because he was moving.

I have some modifications in mind before I put it to use. I really just wanted it to help make floorpan patches for the Crusty Corvair.

Definitely want to see your mods!

Mike

 

[shoggoth80]

MAC truck Wednesday! Before RBRT, there was Precision Torque. Our dealer still has a few sets left on the truck, and priced cheaper than RBRT. Picked up a 1/4” metric set, 5 - 15mm w/ aluminum rail. I have some small, rusty bolts on the Z28 and these should come in handy.

I've got the same set, though a fair bit older. It's a nice one. Broke the drive end on a parts store long handle 1/4 ratchet using the 15mm Socket was fine. Lol.

 

[Jtels85]

I've got the same set, though a fair bit older. It's a nice one. Broke the drive end on a parts store long handle 1/4 ratchet using the 15mm Socket was fine. Lol.

Lol I’m glad it was the ratchet and not the socket lol!

 

[zanyad]

I have some modifications in mind before I put it to use.

Not this exact model, but check out this thread: https://www.garagejournal.com/forum...e-30-harbor-freight-sheet-metal-brake.515232/

 

[SouthernIllinois]

Not this exact model, but check out this thread: https://www.garagejournal.com/forum...e-30-harbor-freight-sheet-metal-brake.515232/

Thanks!!

 

[SouthernIllinois]

Definitely want to see your mods!

Mike

I'll keep you posted.

There are several YouTube videos I need to re-watch and think about.

First up is welding some angle iron between the left and right legs to stabilize it and give you a place to put your feet to put weight on it when using it.

 

[Pinne]

Went to pick up these very cool Starrett vise display stands off Marketplace (I think they were used for tradeshows). They're relatively light, but sturdy. I'm going to mount them to metal plates and then mount vises to them.

The seller had a bunch of other Starrett stuff so I picked up a long pin punch set, a brass pin punch set, a thread gauge, and a few tape measures.

When I got home, Amazon had delivered the Lisle tap sockets that a fellow GJer had posted in the Hot Deals thread.

 

[YesIHaveAHammer]

Sealey Oil Drain Pan 7.6L (DRP02)
It's pretty well thought out, with an anti splashover inner lip, and a pouring spout. They also do a 17L variant.


Wolfcraft Drill Pump With Plastic Casing 19mm (3/4") (2207)
Claimed 3000 l/h at 2800rpm, but I expect to only use it for small amounts anyway. Came with bolts to mount to a board. A few days after I got this they released an updated version with plastic guards around the connections to ensure the drill stays dry.


Hultafors Ratchet Clamps RC 58mm (525383)
These are Bessey XCRG. I didn't see glowing reviews for any of this style of clamp, so I also got Irwin Handi Clamps and Wolfcraft FZRs to look at but returned those. The Irwins are more flimsy, and the Wolfcrafts need a big hand span and have the release button right where you squeeze.


QWORK Silicone Seam Roller 40mm
Got this for rolling down some roofing and fencing tapey things. It's very sturdy and has bearings. The roller is hard silicon with only a small amount of give. Single sided frame so gan get right up against a perpendicular surface.

 

[designer485]

I found a crazy closeout deal at Grainger for Apex 3/8 drive 1/4" bit sockets. $1.16 a piece...I ordered 20 of them. I'll order bits for them as needed, but I couldn't pass that up.

 

[Pinne]

I believe this is the bit holder link, I just ordered a few: https://www.grainger.com/product/APEX-1-4-in-Hex-Bit-Holder-Square-22PF17

 

[Jgaz]

Not this exact model, but check out this thread: https://www.garagejournal.com/forum...e-30-harbor-freight-sheet-metal-brake.515232/

That’s my modification thread. The brake I modified is a smaller unit than the one @SouthernIllinois picked up.
I too will be watching his modifications.

 

[NUTTSGT]

A like new HF brake a guy was selling cheap because he was moving.

I have some modifications in mind before I put it to use. I really just wanted it to help make floorpan patches for the Crusty Corvair.

The nearest HF is about an hour from me but it was on the way to pick up the brake so I stopped and came out with a set of snap-ring pliers and universal joints.

I really wanted the Snap-On snap-ring pliers. The set I was looking at retails for $178. I suspect I could get them for $160’ish paying cash but I don’t use them enough to justify Snap-On money.

I have the same brake, sort of. Mine is a Black Bull brand from TSC.

I just added casters to it couple of weeks ago.

 

[Bogdan M.]

 

[iagsxr]

Akktol BT-607 riv nut kit. This had been sitting in my "Saved for later" Amazon cart for probably two years. I know a few people with this exact kit so I've used them a couple times.

Last week I borrowed my nephew's and broke a mandrel(completely my fault). I said to myself, this is why you don't borrow stuff and ordered my own. I also now know how the warranty process works, which wasn't terrible, so we both have complete kits.

 

[SouthernIllinois]

The rest of my Vessel JIS screwdrivers came in.
$19 from Amazon (actually free using reward points)



I kinda doubt the overpriced ones on the left side of the drawer will see much use now …smh

 

[CoThG]

New Williams ratcheting screwdriver. Half price of the identical Snap-On marked version. Even comes with a Snap-On ACR #2 Phillips bit.

 

[Kurt4440]

The rest of my Vessel JIS screwdrivers came in.
$19 from Amazon (actually free using reward points)



I kinda doubt the overpriced ones on the left side of the drawer will see much use now …smh

I have some Vessel screwdrivers and like them very much, but, right now I have tools in 4 different locations, and need some more JIS screwdrivers. Please let us know how the new Vessel screwdrivers compare to the ones you already have.

 

[willf650]

This is what happens when you go to Harry J Espsteins and click on the what's new tab.



Wanted an additional set of long needle nose for a box at a different location and was going to pick up some Icons next time they were on sale but will give these a go.

My other set is a black hawk brand that may or may not be made anymore. If they are I don't know where to buy them.

 

[mikeinri]

Sealey Oil Drain Pan 7.6L (DRP02)
It's pretty well thought out, with an anti splashover inner lip, and a pouring spout. They also do a 17L variant.

Source or link for the drain pan?

Mike

 

[CHI_Tool&Die]

This is what happens when you go to Harry J Espsteins and click on the what's new tab.



Wanted an additional set of long needle nose for a box at a different location and was going to pick up some Icons next time they were on sale but will give these a go.

My other set is a black hawk brand that may or may not be made anymore. If they are I don't know where to buy them.

What are your initial impressions of those pliers? I’ve always been curious about them.

 

[Catfishdan]

Free tools are the best. I cashed in my Home Depot and Ace hardware rewards points and got a bunch of new toys. A big Veto tote bag, Milwaukee lights, 7 and 10 inch cobras, and a stubby 1/4” Milwaukee ratchet.

 

[Jgaz]

Rare day, at least for me. I received, picked up, or purchased three different items or set.

Ive been wanting a more complete set of Stanley No. 60 chisels for awhile now.
I really like these old tools for general work and also to save my good chisels from abuse.
As usual eBay sellers want stupid money for just an individual tool.

I bought this six piece set for less than slightly more than $6.00 each, including shipping.
They will clean up and sharpen well.

Thanks to all the enablers on this site I snagged the Cat 1/4” drive spinner handle for less than $15.
I liked my SnapOn handle I’ve had for years with its 1/4” female recess in the handle end.
Liked it, but not enough to spend $35+ for another to put in my travel kit.

Stopped at Oreilys on the way home from the Cat dealer and grabbed the telescoping magnet also for the travel kit.

 

[YesIHaveAHammer]

Source or link for the drain pan?

I'm not in the US, and it's a generic item rebranded by Sealey. Quick search on Amazon US brings up the same type by Capri and Neiko. Hazet 197-2 is also similar.

 

[four.cycle]

This is what happens when you go to Harry J Espsteins and click on the what's new tab.

YES! In addition to Channellock, Klein, Wilde, Lang, C.S. Osborne, ProAmerica, and Williams, pliers, they've added Fujiya, Igarashi, Top, and Felo pliers!
Then there's the close-out stuff that won't come up in those searches:
U.S. made plated polished 6 inch slip joint pliers (no name) $4.00 each
China (PRC) "Diamond" 7 inch linemans pliers $3.50
China (PRC) "Diamond" 6 inch linemans pliers $3.50
Williams (import) 6 inch groove-joint pliers $5.00

 

[willf650]

Source or link for the drain pan?

Mike

Those aren’t new nor unique. I’ve had basically an identical one for about 25 years at this point. Mine is probably the larger variant as it will take the 3 gallons of oil from my truck when I change it.

I think its moved with me to three different homes at this point. They are thick plastic and very rigid

 

[willf650]

What are your initial impressions of those pliers? I’ve always been curious about them.

They aren’t as precise as the blackhawk USA made long needle nose I have as they are slip joint pliers but they seem decent and worth the price. I would buy them again at this point but I’ve only taken them out of the package as they showed up today.

 

[L.Cheapo]

New Williams ratcheting screwdriver. Half price of the identical Snap-On marked version. Even comes with a Snap-On ACR #2 Phillips bit.

The SO version has knurling on the shaft, if that matters to anyone.

 

[Twisted Sid]

The SO version has knurling on the shaft, if that matters to anyone.

Good to know that at least this shaft they're giving you is ribbed for your pleasure

 

[225]

I don't have pics, buuuuutttt.... I bought both standard and long 1/2" ICON chrome sockets. They're not that bad. Every other socket set I have is Snap On.

I'm impressed.

 

[crasher98]

Got these things called “gear ties” to keep my spring loaded pliers closed while storing. Cheap and does the job.

Another thing that works for that task is "scrunchies" - those are the elastic bands that ladies use to tie up their hair (for anyone who isn't familiar with the term). Swipe them from the lady(ies) in your life at your own risk tho!

Probably better/safer to just go buy some of your own - they're like 5 for a dollar or something like that.

Edited to clarify that I'm talking about something like this:

No Damage Black Elastics - Scünci | Ulta Beauty

Free Shipping at $35. Shop No Damage Black Elastics Scünci

www.ulta.com

Not this:

https://www.mykitsch.com/products/cherry-blossom-ruched-satin-scrunchies-5pc-set?variant=44782639546549&nbt=nb:adwords:g:19464572824:185127189111:763196982122&nb_adtype=pla&nb_kwd=&nb_ti=pla-294682000766&nb_mi=9617523&nb_pc=online&nb_pi=shopify_US_8068505501877_44782639546549&nb_ppi=294682000766&nb_placement=&nb_si=%7Bsourceid%7D&nb_li_ms=&nb_lp_ms=&nb_fii=&nb_ap=&nb_mt=&tw_source=google&tw_adid=763196982122&tw_campaign=19464572824&tw_kwdid=pla-294682000766&gad_source=1&gad_campaignid=19464572824&gclid=Cj0KCQjwp7jOBhDGARIsABe7C4fTOaBGNnLN0s0TKFM8cWONYF85WxQPIQoQKY23ENHNoR4xevrFOJEaAhpWEALw_wcB

Altho it must be said that the fancy ones would brighten up a pliers drawer quite a bit!

 

[FigN⋅m]

Another thing that works for that task is "scrunchies" - those are the elastic bands that ladies use to tie up their hair (for anyone who isn't familiar with the term). Swipe them from the lady(ies) in your life at your own risk tho!

Probably better/safer to just go buy some of your own - they're like 5 for a dollar or something like that.

Ranger Bands AKA cut rings of a bicycle inner tube work great for this as well as a million other uses.

 

[mikeinri]

I'm not in the US, and it's a generic item rebranded by Sealey. Quick search on Amazon US brings up the same type by Capri and Neiko. Hazet 197-2 is also similar.

Those aren’t new nor unique. I’ve had basically an identical one for about 25 years at this point. Mine is probably the larger variant as it will take the 3 gallons of oil from my truck when I change it.

I think its moved with me to three different homes at this point. They are thick plastic and very rigid

Thanks guys. I don’t think I've seen one before that's overflow "resistant" LOL. Quick internet search came up with some with decent prices, but crazy shipping. I'll try again.

I have a really old plastic one with a drain tube, but my go-to oil catcher is a large tray (think under-bed Rubbermaid storage). Learned about that trick from working at Domino's Pizza a million years ago (we could buy heavy-duty plastic dough trays for $5). Used to put 30k miles a year on my cars, did a LOT of oil changes (not to mention brake jobs, but I digress...).

Great at catching oil, not so great at getting it into a container for disposal.

Mike

 

[Beerhippie]

I don’t think I've seen one before that's overflow "resistant" LOL.

It's more like "Slop-resistant". If handled carefully, it won't slop over as you carry it to the used oil drum. Probably.

Been using one for a few decades.

 

[mikeinri]

Gotcha. Noticed I avoided the word "proof" LOL...

Mike

 

[rword]

New Williams ratcheting screwdriver. Half price of the identical Snap-On marked version. Even comes with a Snap-On ACR #2 Phillips bit.

wheres the best place to buy williams products?

 

[willf650]

Thanks guys. I don’t think I've seen one before that's overflow "resistant" LOL. Quick internet search came up with some with decent prices, but crazy shipping. I'll try again.

I have a really old plastic one with a drain tube, but my go-to oil catcher is a large tray (think under-bed Rubbermaid storage). Learned about that trick from working at Domino's Pizza a million years ago (we could buy heavy-duty plastic dough trays for $5). Used to put 30k miles a year on my cars, did a LOT of oil changes (not to mention brake jobs, but I digress...).

Great at catching oil, not so great at getting it into a container for disposal.

Mike

Walmart.com has them and their shipping is reasonable. You may be able to get it shipped to store for free.

 

[four.cycle]

Performance Tool W83195 FORTY INCH flexible magnetic/claw pick up tool. $14.99 at O'Reilly's Auto Parts.
(Also available in a 24-inch model - W83196 - which sells for $12.99)
Catus Maximus review of the 40-inch model.

I had no problem getting the magnet to pick up the small Lectrolite combo in the image.
The larger KMart 11/16 x 19/32 DOE was tricky, but it did pick it up and hold it.
It would not pick up the 8 inch Ridgid pipe wrench, but did get enough purchase to drag it across the cement using only the magnet.
YMMV

 

[Winterborne]

Another compact Proto socket kit