Between 705 & 1200 SQ/FT Workshop Build 30x30x12 Ocala, FL

[wachuko]

Found a used Condor chock in like-new condition for a good price. This will be a better option than what comes with the lift.

 

[wachuko]

Motorcycle/ATC lift arrived and now in place. As mentioned, replaced the wheel holder that comes with it, with a Condor wheel chock. Added traction tape while in there.










All done and also done for tonight...

 

[VietGnome]

Been a fun post to follow. Lot's of inspiration and ideas for my upcoming 30x40x12 stick build.

 

[wachuko]

Thank you. I can't wait to have it all mostly done... I still need to empty and take down that rack in front of the lift. So much **** from the recent move to this new house and workshop. Soon... soon...

Finished installing grip tape

 

[Bob Heine]

I am trying to decide if I stick with the MaxJax or sell it and replace it with a four-post lift. Now that I have the ceiling height to have one... Not sure what I want to do on this front...

Definitely a first world problem.

 

[wachuko]

Definitely a first world problem.

Yeah, I know. I need to remind myself that I need to simplify and get rid of things, not stuff more **** in the garage/workshop... I should stick with what I have and move on. Well, as far as the lift goes. I still need to continue to get rid of a lot of the stuff here...

 

[Miss the Pontiacs]

I never had a MaxJax or similar, hell I’m new to the 4 post as well. Put a 4 post out at the lake primarily due to storage requirements last summer. Watching your post as hopefully will be getting the interior done at the lake. Decided to go 3/4 plywood on the walls to the 8’ level. Then finish off the upper portion and the ceiling with white metal.
Funny how a local online auction can help you make some of these decisions for you. Price was good so couldn’t resist going this route. Now only is I could find a wack of insulation this way I’d be set. I sure as hell would like to have some heat in there this winter.
Not as much of a problem with your location.

 

[shortykorte]

Thank you for sharing replacing the seals. I have the same MaxJax. It’s been sitting for several years so who knows. With the new shop I have thick footers for a two post but leaning towards a 4 post with casters. I’ll set up the MaxJax on an outside pad or sell it.

 

[wachuko]

Thank you for sharing replacing the seals. I have the same MaxJax. It’s been sitting for several years so who knows. With the new shop I have thick footers for a two post but leaning towards a 4 post with casters. I’ll set up the MaxJax on an outside pad or sell it.

Yeah, most likely, just due to time, the seals in yours are like mine were... Replace them.

And I am where you are... I still have not not bolted it down because I can't decide if to keep it/sell it and get a four post... I really want a four post now that I have the height to accommodate one...