joepaintin
New member
- Joined
- Jul 11, 2026
- Messages
- 2
Unidentifiable tool
- Thread starter joepaintin
- Start date
OP
joepaintin
New member
- Joined
- Jul 11, 2026
- Messages
- 2
The ones with the conical tip are Weldon 82deg per the stamp on the shank. The ones with the cylindrical tip don’t have a stamp marking is it a different manufacturer and different use? Who made them?
JuncleJohn
Well-known member
Yep, I concur. Countersinks or chamfer tools, depending on your own terminology. Most would call them countersinks, a machinist or toolmaker would most likely call them chamfer tools.
Typically the 82 degree would be for an inch flat head screw and 90 would for a metric.
John
Typically the 82 degree would be for an inch flat head screw and 90 would for a metric.
John
Old Man Roger
Well-known member
They're sometimes used to countersink the mounting plate for a saw set.
They're sometimes used to countersink the mounting plate for a saw set.
Somehow, it's always about the saw set
Old Man Roger
Well-known member
Im on a World Wide Web disinformation campaign.
Im on a World Wide Web disinformation campaign.
A(lack of)I?
Old Man Roger
Well-known member
Eggsacilly!
Cruzan80
Well-known member
Old Man Roger
Well-known member
I read the people that are hired to train AI are using another companies AI, so AI is getting AI slop as input. They’re doing it for us.lol
four.cycle
Well-known member
Ask the AI bot about Limestone Lettuce Salad
cvairwerks
Well-known member
As PC and OMR said, countersinks. There are two distinct types...the ones with no extension are simply know as "chatterless" zero flute c'sinks and the others are piloted zero flute c'sinks.
Those don't look to be in very good shape. I wouldn't use them if the c'sink was critical.
Those don't look to be in very good shape. I wouldn't use them if the c'sink was critical.
Mostly too hot here in Eff El Aye to grow good Bibb.