Search results

Welcome! Nice garage. I am just sound of Raleigh..

What about giving one of the tool truck guys some money to deliver it? I had my SO guy bring a tool box to my house for me. It cost me $30, but well worth it. They are equipped to deal with moving tool boxes...

Great looking garage. Plus I am a sucker for that GLI :)

Here are some more picture of the hutch. :) https://www.facebook.com/media/set/?set=a.147491921992139.38741.137012083040123&type=3

I built this for my SO box. I spent about $250 building it. I have more pictures somewhere. I really wanted the proper hutch, but could not afford it.

Nice set up! We just spent weeks looking at houses in Pittsboro. The wife and I love that area. Sadly we couldn't find what we were looking for. Cheers to a great looking car and barn!

Well, I repaired it like I said. We will see if it is good enough. I really want you all to know I am thankful for the advice. Thanks Charles

I pulled the tape back. There is damage to the wire shielding. It's just one little spot My plan is to use a heat shrink crimp connector. It says its rated for 600v. Then put some heat shrink over it.

It goes to the outlet above the stove. The microwave/vent is plugged into it. If I have to add a box, there is plenty of room to add one. There is not a junction box near the panel.

There is a mark on the crank, but not one on the cam. You know you are right when the crank is lined up. There is a slot in the cam that has a hole behind it. Vw has a special pin that locks the cam. The slot at about 9:00 is the one with the hole. Here is how I do those belts. 1)line up...

@speedy thanks for the link! It seems like a splice in the panel is ok. Do you find that inspectors freak out about it? I don't want to deal with an @ss inspector and have to fix it twice.

That's what I figured. Luckily that wire come in at the bottom of the panel. It's also by itself. It should be an easy fix. Thanks for the help! :beer::beer:

Can I splice inside the panel?

there is not enough wire to cut it. From what I can see there are 3 options to repair this. 1) heat shrink the wire 2) replace that section of wire by cutting and using a wire nut to connect a new section of wire. Not sure if it's ok to do that. It would be in the panel and covered so it may...

Hey everyone I need some help. We are selling our house. The inspector found a wire in our electrical panel with some electrical tape on it. There is also a small burn mark near where the tape on the wire. It must have been that way since the house was built in 2004. We have never had an...

Right on, welcome, from Raleigh!

@wideopentuning i have had mixed results with that set. How has your experience been over all? I have a few factory VW wire pin tools. Sick of paying $50 each for them, but they work awesome.

That is what I was thinking too :beer:

I like those racks! They won't scratch up your wrenches

I have warrantied tons. I seem to go through streaks. I will go months with out breaking anything.. Then I will break like 6 things in 2 weeks. Meh, all part of the job.