Search results

Re: Infloor heat So what change the pumps around so the flow goes the other direction? Or just put the top T at the floor then it would be a straight shot? How is the tank pump controlled?

Re: Infloor heat Of my outside measurement is 24x24 my wall is 6-1/2 thick I came another 2ft in with my out most loop so Im not wasting my heat to the outside so technically I heading 240.25sqft of slab. Im not looking for it to heat things to 90 Im looking for anything above 32. I was...

Re: Infloor heat LOL thanks for explaining it the way you did! Ok so I add the second pump how is that controlled ? The pic what you are talking about? Ok what you are talking about cant I just control the heat flow with the valve ?

Re: Infloor heat He bought a outdoor wood boiler and has it hooked to his house and garage.

Re: Infloor heat So if I add a loop with base board I could add more area to control the temp? I can also control the temp on the front tankless heater . The guy I bought the tankless heater from had this in a 24x24 with 200 ft and he had the temp about half on the unit and it kept his garage...

I found my problem its the sensor that is adjustable 90-200. What do I call that sensor?

Re: Infloor heat anthony666 I have a AquaStar AQ 125- BLP... Ok I here ya's about hiring someone but I would rather do it my self so I learn how to do it and if there is an issue with my system I can figure it out my self ! "Example" Im into wheeling (offroading) I had a rig that I put a...

Re: Infloor heat Mygarageone you must be rich! I for one don't have a money tree growing out back.

Re: Infloor heat Ok so I get the tank and air purger where do I install it in my system? On the line that comes from the pump?

Re: Infloor heat OK I ll take a look at them.

Re: Infloor heat I could even install a thermal switch to turn a fan on and off?

Re: Infloor heat I have an older rad that has brass tanks I could get reducers and connect the upper hole to the pump then the lower side to the line going to the heater?

Re: Infloor heat So if you are correct about temps being the same in as out then my 576 sq ft garage should heat up nicely ?

Re: Infloor heat What about installing a radiator like one out of a chevy pickup into the loop this could act as a exp tank also?

Re: Infloor heat Yes the orange pex coming into the pic from the left is coming from the pump into the heater then the pex going straight down goes into the floor I was going to use the valve in the picture to control it.

Ok I made another thread.

Re: Infloor heat If I did not have the cryo-tek straight I might of had problems if my system was running last week and had it mixed and ran out of propane. We were hitting temps of -40 here

OK so this is my setup I have a blow off valve that goes in place of the funnel. The pex coming in on the left comes from the pump....The valve is there just for another way to control the heat. 1. should the pump be before or after the heater? 2. Im not understanding how to wire the thermostat...

not connected to a water supply... Im using the antifreeze for in floor heat.

Yea I was messing around adjusting the flame one day and got a jolt and seen a spark mmm now I m wondering if that messed up that sensor...