Search results

Hey guys, im stumped. Been searching with no info and no luck. I have the master cool set that has 45 degree and bubble flare dies. I was curious if I can use the 37 degree cone and create a single flair 37 degree fitting? I need to make a brake line to connect a 3/16 metal tube to a an style...

I bought these from a prototype company. I am keeping a couple for myself and selling the rest. The units were used in water purification trailers. Each trailer had 5 units, and they were used for converting AC power to DC to power their equipment. Ranges of time on units I've seen have been...

Hello! I am working on a 150' boom truck and one of the hydraulic cylinder pressure valves rusted off and I need to repair it. I need to clean the rust so I can weld on the repair, but usually when I do something like this I will either grind it, sandblast it, or hit it with a wire wheel...

Hi, I bought a 17 F250 that needs some work, and it needs the BCM replaced. I bought the IDS software, and VCM and it works as it should. I have never programmed a BCM before and was wondering if anybody here might be able to point me in the right direction since this is difficult...

I was hoping I might get some information regarding help I need installing a tube heater in a new blocked off section of my industrial building. The new section is non insulated cinder block and the dimensions are 80x30x18. I have new Reznor 175k BTU Tube heater and the exchanger...

I know there are lots of scanners out there and some offer more functionality than others when you are dealing with the non-vehicle specific type scanners like a tech II I do mostly European (BMW & Mercedes), but still need functionality for all brands. Currently I'm using a older Launch X431...

I need to heat a 30x20 industrial area in my building with 16' ceilings. Two walls are insulated and the other 2 are the corner of the building with large glass windows...so not the best on that end. I was going to buy a new heater, but a friend of mine has these for free. Any thoughts on if...

I was looking for a complete nice HSS tap and die set that has everything. SAE and metric of all variations of standard, plug, npt taps, etc in a nice case. I am tired of having a huge drawer full of all kinds of taps/dies that is a mess. Most of the time I have to buy the tap I need anyway...

I have a 5th wheel RV and was wondering on how I could add extra capacity since I spend long periods of time in desolate areas and have the heat, generator, hot water, fridge, and stove run off propane. 8 40# tanks nets me roughly 80 gallons or so (would like to fit more but can't). I have an...

Looking at purchasing a hot tank parts washer and don't know too much about them. Been looking around for something used and just waiting for something good to pop up. I don't need anything huge, biggest thing I would put in is an engine block. Is an electric or gas style going to be better...

I want to put heat in my shop this winter, I don't feel like freezing through this next year! I have a poorly insulated 7000 square foot building (40x175) with 25' ceilings. Any thoughts on what I should run? I have a crane and can only run the heaters width wise instead of length which...

I'm sick of not having the right tap or die when I need it since i've just been buying them individually as I need them. anyone know of a good hss ground thread tap and die set in standard and metric? I just want to buy one good set and be done with it!

I bought one a while back in a large purchase and never knew anything about it. I just brought it over to my work area and am going to get it setup for daily use. Anyone know anything about it? Its older and a little beat up, but looks like its real solid and ready for lots of abuse. not...

I really want a larger service cart that I can move around easily, but still hold a decent amount of stuff. I see the harbor freight one and its tempting, but wondering where i could find one a little bit bigger

I own a salvage yard and have about an unlimited amount of used engine and transmission oil. I want to heat our dismantling bay and never have because its an older building with such a high 25' ceiling and very very drafty,old roof, etc Would an oil heater be able to heat this area? I don't...

same as this one here http://www.mitchellinstrument.com/skf-tmbh-1-portable-bearing-heater.html like brand new $1000 shipped 248-506-5916

I just bought a bunch of these and don't know anything about them. They are probably the most heavy duty reel's i've ever seen and weigh a ton. They have model number d745 on them, but I can't find any info on them anywhere online. Anybody know anything?

take 70w bulbs ~10,000 lumens efficient and very bright 480v $100 each with bulb brand new in box 248-506-5916

Brand new shape. Came out of a Chrysler plant. I bought 4 and only ended up using 2 of them. These are extended height. $7300 each new asking $4000 each 248-506-5916

In brand new condition. Don't have a picture of the actual unit at the moment. $1500 shipped 248-506-5916