Search results

Trying to find replacements for these barrel nuts with holes for adjusting wire rope. Or at least the proper name. Thanks

Hi all Going to look at a MD6XP, looks clean in pics, but seller states rams leak when above second lock position. My questions is does this sound like general wear? Specifically with them leaking when extended. I know to look for wear or damage on the rods but I have never looked at a lift...

Happy Thanksgiving All Have the older style pressure pot blaster from HF. New hoses new fittings, Home made end consisting of ball valve with cone tips. 3/32 1/8 tips. Running a 7.5 hp 80G IR compressor. My problem is when I run it the sand is coming out soft enough to put a bare hand in...

Hey All, Have a new shop in an industrial park. Im getting PG&E out to look at it next week. Im going to upgrade to a larger panel. Currently 100 amp single phase. I have 3 phase in the shop next to mine and possibly interested in that. My question is: Do they install 2 separate panels to...

Trying to wire up my Sensi. I had to wire up my C or blue wire which wasnt in use with my dumb thermostat. Now however Im not getting 24V to all legs. R-C and R-G are getting 24V+, however R-W & R-Y are 12-14V. With talking to the Sensi help line I understand I must have 24+ to all 4 legs...

I have an IR compressor 7.5 Baldor motor and a MiniMax MM16 Italian 4.8 hp motor bandsaw. 33A & 24A. They will live next to each other and not be used together, my compressor is powered off if not using. I'm running 6/2 wire to an AC disconnect about 12-14 ft with a 60 amp breaker at my main...

Does anyone know when they stopped being made in the USA? Ive looked at a couple on CL. One was the new tan color, and the pump had made in USA cast, but a second was the older gray color but the pump didnt have made in USA casting. Any ideas? Pump replaced maybe. Am I not correct in the...

Hey all, have chance to get s Curtis 80 gallon w 3 phase 5hp for less than $200. Seller says it fills to 150psi but the pump is noisy. Without breaking it down I wont know for sure, but can anyone give me some ideas as to what it might be? Not knocking just noisier running that it should is...