Search results

  1. S

    Stain/Sealant for wood floor suceptible to growth

    I have a wooden deck that is in the shade a lot and had a thick growth of algea/mildew/mold, etc after a few years of neglect (we just bought the house). I had to power wash it to remove the thick growth, then sprayed it with 30 Seconds Mold and Mildew remover to kill any left. It's not a...
  2. S

    Recommend tough wood floor covering for garage storage

    Moving to a new house. My new 20x20' garage has a full second story. Currently it is carpeted. I want to rip the carpet out and put in some sort of flooring to protect the wood. I plan on keeping motors, trans, dirty spare parts, etc up there. Good possibility for spilled oil, water...
  3. S

    Thoughts on Samsung Mini Split Heat Pumps

    I'm looking into getting a Mini Split Heat pump. Local HVAC company I like installs Samsung Heat Pumps and is recommending the Samsung Max 24k Mini Split Heat Pump AQN24VFUAGM for my insulated 22'x22'x11' garage. http://www.amgair.com/samsung-max-mini-split-heat-pump-aqn24vfuagm-24k-btu/...
  4. S

    Recommend a heat pump

    I'm thinking about getting a heat pump for my garage for heat in the winter and AC in the summer. I live in central NJ where it rarely gets below 30* in the winter and when it does, I don't go in the garage. I have a portable propane forced air heater that I use to heat up the garage before I...
  5. S

    Corded drill recommendation. High torque, High speed VSR

    I need a corded drill to operate EZ Car Lift. Needs to be greater than 8 amps, dual speed, infinitely adjustable from 0-max RPM (new Dewalts start at 500rpm and won't go slower, just shut off). Would really like keyless chuck. The more powerful the better, the faster the better. I want to...
  6. S

    Cheapest EZ Car Lift Price

    What is the lowest price you've seen or heard about for the EZ Car Lift? Links? http://www.ezcarlift.com Thanks. -Scott Edit: I set up an ongoing group buy and am now selling them for $1650 shipping immediately. See below.
  7. S

    EZ Car Lift

    Looking for an EZ Car Lift http://www.ezcarlift.com -Scott
  8. S

    Help Crafstman Professional Compressor broke - what is this?

    I've got a Craftsman Professional 80gal compressor. I was grinding some stuff so it was cycling a lot when all of a sudden I hear a large hiss from my compressor closet while the compressor was running. After shutting it off, it stopped hissing. I noticed that the small pipe that goes from...
  9. S

    Air Filter for garage

    Any recommendations for an air filter system to help remove dust and vapors/gases commonly found in garages? Preferably a HEPA with active carbon, not an Ionic or ozone one. Will need to be able to clean 500-1000 sq-feet. -Scott
  10. S

    3/4" filter/separator/filter

    3/4" filter/separator/regulator Loooking for a cheap but good 3/4" filter, water separator, and regulator. Links please. Also do these need to be installed horizontally or can they be installed on a vertical run? -Scott
  11. S

    3/8" cordless ratchet

    I'm looking for a 3/8" drive cordless ratchet. The only one I could find was a skill 1/4" drive cordless ($30). Anyone know where to get a 3/8" drive cordless ratchet for under $100? -Scott
  12. S

    Where to got flex line for compressor

    I've got 3/4" out on my compressor and am running 3/4" pipe for most of my run. Where can I get a 1.5 feet of 3/4" flex line to go from my compressor to my hard lines mounted on the wall? Home Depot only has a 1/4" flex line. -Scott
  13. S

    New homeowner in NJ

    Hey guys. I just bought my first house in July. Requirements were a 2+ car garage, since betwen my wife and I, we have 4 cars. And since I like to pretend I'm an amateur racer, I also have to play amateur mechanic. ;) Ended up getting a 24'x24' 2.5 car oversized garage with loft storage...
  14. S

    Is it ok to route copper compressor piping outside?

    I have my compressor in a closet in my garage. I'm thinking about adding a zig-zag portion of pipe to get some extra piping to let the air cool. Originally I was thinking about putting this next to the compressor, but have concerns about space as well as heat from the compressor. Would it...
  15. S

    Sound Insulation for Compressor Closet

    I have my 80gal compressor in a closet in my garage. I would like to further reduce the noise by adding sound insulation/deadening material. I'd like to do it on the cheap side. Any suggestions on what I can use for cheap sound insulation/deadening? The white closed foam insulation I...
  16. S

    TP Tools filters/regulators/seperators

    Who makes the filters, regulators, and seperators on the TP Tools site? Are they good? The 1/2" Deluxe Seperator and Filter combo ($110) plus their 1/2" Coalescing Air Filter ($70) look like a good deal. Are there better products for a comparable price? If so, what and where (links...
Top Bottom