Search results

I have 2x6 construction. A modine propane hot dawg is on the ceiling. The ceiling is r30 batts with 5/8 sheetrock. I believe the walls will be 1/2 inch sheetrock. But, what R value should I chose? I am looking at getting the insulation from home depot. This is a detached garage that is...

I have the heater hung to the sheetrock and a 1/4 inch per foot down pitch for the interior pipes. This puts the concentric box at a height where the exterior pipe will come out a few inches below the overhanging soffit. Is there a required distance from the top of the exterior pipe to the...

I have the Hot Dawg hung, insulation, vapor barrier, and shhetrock where the heater is. The next plan is to do the vent and have it piped for the propane lines. How do I have the lines done so that it doesn't screw up insulation and rock in the future? The black pipe will be on the wall that...

I have a modine hot dawg HDS heater with a concentric kit and I need 6 inch double wall b vent, 4 inch double wall b vent and 4 inch single wall. I cannot find a source for the double wall B vent. Does anybody know where I can purchase this stuff. I thought I could just run to home depot or...

This is a working garage. There could be welding, skid steer, car repairs, etc.... At one point, Ghostshield was recommended. Which product exactly would you recommend? Thanks.

My detached garage is 3 bays, 30x40 with 12 foot ceilings with two 10 foot garage doors. It is not currently insulated, but that is in the future plan. I am thinking of getting a Modine Hot Dawg. I currently have a Modine H20 Hot Dawg in my attached garage that is insulated. I have it hung...

I purchased a used Mohawk lift and I have repainted the bottom of the posts. The lift had mild scale and rust under the posts and now they are clean, smooth and painted. What do I coat the floor with? Once mounted, this part of the floor will not be seen for quite some time. I am looking to...

I bought a used 9K system 1a. Anybody know the paint codes that Mohawk uses? I just want to get the paint and spray it myself with a compressor. Thanks.

I have about 550sqft. The garage is mostly for parking two cars and some light mechanic work. I wanted to skip the flake in the floor so that I could easily find any dropped parts. I was thinking of just light gray and then add the anti skid. I was leaning towards Nohr S. I kind of just...

This garage is going to be used and abused. It will have a skid steer in it, which could have muck on the tires, and a lift. There will be occasional welding. Plenty use of heat to remove stuck bolts. Plenty of grinding of rusted parts. It is 40x40. My thought is that clear would be the...

I would like to apply a polyurea coating. I called a local tool rental shop and the grinder is $185/day for the machine, which is an edco sec-1.5L. I would then have to buy the tool to attach to it. Then I see this from Armorpoxy...

I have a two car garage that is about 550 sqft. I am getting ready to coat the floor. I am going to diamond grind it with a rented Edco grinder. My plan is to then fill in cracks with Extreme set 100. But, which coating? I was hoping to avoid flake, as I may drop small objects on the...

I am planning my continuation of my garage project and I am pretty much ready to attack the floor. I have a couple of cracks. I have seen videos of Extreme set 100 and it looks impressive. But, if you can wait 30 or more days is actual cement repair better? I was considering Rapid set Cement...

I finally have my sheetrock walls painted and I am almost done with the concrete foundation knee wall smoothed and plastered. All that will be left is the floor. I had purchased some tiles from costco last year and then returned them. They are nice, but not for me. I really want the look of...

I am considering going with the plastic tile floors. It sounds like Motofloor is a version of Racedeck. Any thoughts on these products?

Well, here is my situation. I believe the measurements are 24x28 two car garage. I put a modine heater in at the end of last winter and within 5 minutes there was a dust haze everywhere. Brother said that I needed to paint to cut the dust down. The walls and ceilings have no been repaired...

This is a two car garage. It is heated. It will see only very light work. It is mostly just to park the cars. One of the cars is a winter garage queen, the other will see NY road salt. We learned we needed to paint the floor when we turned the new garage heater on and it kicked up a ton of...

Garage 1 is attached to the house and cars will be parked in it and things stay clean. This garage floor should look beautiful. Garage 2 is detached. It will have a 12,000 lb lift, parking for skid steer, truck and plenty of **** will fall on this floor. Dirty parts will be removed and fluid...

I would like to heat my 22x 24 garage in my house. The garage is finished and has some degree of insulation, but I have not opened a wall. Above the garage is a rec room that is way too cold in the winter. It is often 7 degrees cooler than the rest of the house. So, I have been advised to...

I some family who paints and I can get this product discounted. What do you think? http://www.benjaminmoore.com/bmpsweb/portals/bmps.portal?_nfpb=true&_br=1&_pageLabel=fh_home&np=productcatalog/product_pages/paint/prd_p35