Search results

My master series does the same thing. I really had to yank on the drawers to get them opened all the way. First time I got them all the way out I found tools the previous owner left in there.

We ended up hiring a company that does garage floors to come in and do it and will be sealing it next week sometime. They blasted it and used a hand grinder. They have been at it for a week now. It's going to be an auto shop. Right now it's two more bays with a drive on alignment lift and a...

We are in the process of expanding the shop at work. The new part of the shop had carpet glued down on it. We had the carpet removed and it left all the glue down. The concrete was just rough poured and then glued on. We rented a concrete grinder but it is just balling the glue up and not...

Snap On 1/4 inch extension set and a 1/4 inch by 24 inch extension. Shortly after that I had him rebuild my flex head 1/4 ratchet and bought a replacement for work.

I wipe mine down once a week with a microfiber towel and I Lucas slick mist it every now and again. I got it used and it was covered in stickers when I got it. One of them was a pain in the **** to get off and I ended up with a shiny spot on one of the drawers.

I love my 029 farm boss. It's due for service but it has always been a good saw that doesn't let me down.

I haven't messed with my old Quincy lately. It's sitting in my garage waiting it's turn. I have a newer upright tank that I was planning to swap my motor and pump onto. Ill post up when I start on it.

I use a bent flex head no detent everyday. Mines a snappy and he just upgraded the head of mine. My dad bought it and brought it home and I cobbed onto it and haven't layed it down since. I use it a straight flex 1/4 inch and a straight flex 1/2 inch On a daily basis.

My latest purchase.

Yeah I don't know why it was cut off. Must have cut it and hung it on the ac machine I guess.

Found this in my Dads collection. It is cut off and had a short piece of string on the end of it. I was thinking ac shut off ratchet but I'm not sure.

Dang I was just at the dentist Monday. I almost asked them what they do with all their old tools.

Wouldn't that create hotspots in the painting surface? Paint might flow better in the warm spots and not on the cold.

I have the same box at work I use daily. 1969. Dad got it used. Used it til the 90s and brought it home. I restored it in college and am still using it. About to outgrow. Mine doesn't have the bottom drawers. The way the garage door works will be in the way if the sink. When it's up it crosses...

Dewalt lithium 12 volt 3/8. I love em.

Got a starter solenoid put on my craftman mower and charged the battery. Pulled the flywheel cover off my free snapper tiller to replace the pull cord.

Started deep cleaning and organizing

We get the stuff from Walmart or lowes. I think it's duck brand. We have some original windows from 1890 in our bedroom. It works well and does help keeping the draft down.

https://vimeo.com/106664497 Pulled the motor off. Blew it out any tested it the other day. Worked good so I mounted it in the compressor. Ran it to about 20 lbs and shut it off. I didn't want to put too much pressure in this one. Drained a gallon of water out of the tank and restarted it. I've...

Snap on side cuts under the headlight of an Acadia a couple weeks ago. Snap on trim tool on the cowl of a Silverado last year. Sent from my iPhone using Tapatalk