Search results

  1. H

    BUILDING GRAVEL FOUNDATION FOR A 10X14 SHED

    I used road base and then used a compactor- it was like concrete when I was done. My shed is 10x10 I made the area 12x12
  2. H

    480V Vulcan Oven Help

    This is why you should have a use reputable dealer for food service equipment, or a consultant.
  3. H

    Looking for a basic line or generator transfer switch

    This is what I have, its basic. Turn the generator on and flip the switch so the generator powers that circuit https://www.amazon.com/Reliance-Controls-Corporation-31406CRK-Generators/dp/B000BQN4T2?tag=atomicindus08-20
  4. H

    Another is it to close to the sidewall to fix tire question.

    I just plugged one in about the same area
  5. H

    How to fix or replace leaky metal roof?

    Looks like a smith built shed, I have one smaller it does not leak. Maybe call them and see what they say.
  6. H

    Ever leave the house and wonder if you shut the garage door?

    I have turned around or backed up the street a few times(quite a few), it has been closed every single time
  7. H

    Mini trencher

    I just did this, rented the 24” from Home Depot was about 279.00 with the insurance for 4 hours. I did 3 trenches totaling about 71’. It saved a bunch of time, I would still be out there. I am in Florida so it was good except for the 3’ piece of rerod . I also stopped to read how to use the...
  8. H

    Antique & Vintage Lock Thread

    I found this lock in some stuff i got from my Dad.
  9. H

    Ethernet Cable Through Exterior Wall?

    I ran mine through the soffit. Went into the attic- then to the 4 corners of the house. Use a grommet to hold in place on soffit. I have a swann brand camera system . Beng in Florida I ran the wires in the winter t8me so it was not so hot.
  10. H

    Gas MIG Questions

    I get my gas at northern tool also, the small pony
  11. H

    Tool identification

    Thanks for the help.
  12. H

    Tool identification

    Does anyone know what this might be? It was in some tools I got from my father
  13. H

    What did you do "IN" your garage today?

    Changed out the water heater. When I opened the top where the wire are they were buried in water. Surprised it had not tripped the breaker. It was 23 years old. Was bowed at the bottom and leaking at top
  14. H

    What did you do "IN" your garage today?

    Flooded a corn hole board I’m making for a friend , it was the dining room not the garage
  15. H

    Placing shed skids directly on ground, not removing topsoil.

    I had a pre built shed delivered. I had prepared the area with road base about 1 foot larger on all sides. Rented a compactor to level it out. In Florida they have to be anchored Down
  16. H

    Converting old halogen light to LED

    Super bright LEDs has a bulb to fit. I did a smaller one last year
  17. H

    Anchor air compressor

    I have a 60 gallon also. I put it on a 2'x2' 3/4 thick piece of plywood - makes it easier to move also
  18. H

    Genie garage door button protocol

    I just replaced my 23 year old craftsman with a genie. reused All wiring. I will say it’s is quiet.
  19. H

    What would this socket fit?

    Perhaps a lugnut
  20. H

    Vintage test equipment

    I got this when my Dad passed away. He was an elevator mechanic for 32 years. This was one of the first items he bought. I have yet to use it. he worked for Montgomery Elevator in Moline Illinois.
Top Bottom