Search results

This is a test spot with above enamel yellow and some Milwaukee Mercury Racing Blue paint left over from boat engine rebuild, it looks alittle lighter and is alittle metallic.Maybe to light, I did a parallel test spray with brake cleaner,letting it run off side of jack,not babbying it, it...

Thats a walmart neon.I call it a "Patriot Blue" bulb,Figure b cool looking from the street. Im thinking the Safety blue it close to light,like a sky blue. The 350z Is called Daytona Blue, little metallic in it, Thanks Rob

I talked to a few diff people at Sherwin Williams, They are recommending their Macropoxy 646 - 100 2 part,color *Safety Blue* They say spray at 3000psi, brush, or roll it. Not sure if the color is close to the walker blue??? Paint $54.19, Hardener is $65.00 Thanks Rob heres a test...

I have a Napa/Walker floor jack Im rebuilding,Originally Grey,Ive striped it.bead blasted, What do youall use for repainting these Jacks??? Im figuring the most that would get on it is BrakeKleen, Im not finding the right color and guessing the areasol might not hold up,still researching it...

last week,,,, selli,ng old Honda Gen Not getting much response, wire in some cree blue Leds, few nights earler, installed coil,wire,mag,waxed,installed, blah, Wishing had sunlight like Alaska:D Rob

******* in the wind, Trying to rebuild my old Napa/Walker jack...guessing its going take longer than I planed:mad: during at least mounted up my new vise.

Well I got it apart,The nut was tuff to get off,buggered up some, the shaft is showing some rust pitting, I already have the seal kit. soaking all the parts now, The jack had started leaking down awhile back,but it started back to working, Figured better not trust it What do you all think...

been changing out red to Blue:)

The cheapest ive seen around here for Brakleen is 2 for 7.00. been years since seen it below that,or im missing it on sale, I use it on everything, everything,building motors ill use 2-3 cans just on the block, at the race track, the only other cleaner i Use is Gumout carb cleaner, I prob...

The last shop did me wrong on this jack. and repainted it covering up the Napa md#. Was hoping to find someone that could do it, there only 2 places here. Guess the only tool I need is for the spinner nut,

I have a old Napa jack,it was rebuilt years ago and now is leaking down while pumping. Do you all recommenced someone reputable that could rebuild the cylinder? Thanks Rob http://www.garagejournal.com/forum/archive/index.php/t-305506.html

I was wondering if its just the style of the jaws thats the diff? ive found the 6in 10107 at 919.00 10031 at 959.00 5inch 10096 at 679.00 10026 at 843.00

Whats the diff between these 2 styles of vise? I do not like the combo style, dont need the pipe part, I like the deeper area under the jaws style. I have a cheap import one now,its worked ok for years,but it doesn't open enough, its 4 3/4 wide and opens 3 7/8. Ive been looking for...

The garage is full,Camaro is up on stands, Buddy at Nissan gave me some 5 gall buckets of polish,the mothers polish for the powerball works good, then i did the motors alum wheel polish by hand. I just bout the flex and a bunch of pads, etc from autogeek for doing my boat, I started out using...

When God doesn't give you enough daylight, and the bugs at night make it unbearable,Garage not deep enough to close it,,AC worked pretty good, I buffed and wax like this for 4 nights.Got stock in Autogeek.com,lol one day Ill have somewhere/ enough room,

just a few minutes of buffing;)

geting junky

Snapon tool wrench carrying case,fpr 11pc 3/8 allens head socket set tray 3/8 extension tray like new,never used, dusty from warehouse package deal all 3 for 25.00 plus shipping,usa only, Rob:D 601948sofa 39209

Striped,painted gunmetal grey on front,cleared,door jams black, bottom tubing painted gunmetal also, rockers painted white,next is tape off inside repaint roll bar/chassis tubeing etc, then polish black alum panels,polish bottom alum panels,replace black rivets,then start putting back together:D...

it says it only hold 15lbs of media. my 199.00 one prob has 50-60lbs in it