Search results

I have a snap on air drill pd3a in great usable condition. $ 45.00 shipped in the lower 48

4 piece 3/8'' thru 7/8'' sizes all in exellent shape. The only wrench with a noticable flaw is the 7/8'' .There is a small spot a little larger than a bb where the chrome peeled. It is located where the 7/8'' stamping is. $20.00 shipped in the lower 48

I have a very nice Chevy valve reseating tool in it's original box. Not sure value so I will say $20.00 shipped in the lower 48

Here is a bunch of pliers,hex sets ,vice grips ect. Both pairs of snap ring pliers are KD. The red handled one are not that old the silver handled ones are dated 1962. There is a standard and metric eklind hex sets. No 10-w vice grips,all of the green handled precision pliers are...

Brown & sharpe 1'' micrometer in mahogany case with original paper work and tools. This micrometer is mint aside from very softly scratched name in the bottom as you can see in the pic. $40.00 shipped or best offer.

I have 2 Proto tappet wrenches,7/16-1/2'',9/16''-1/2''. 2 angle wrenches sizes 9/16'' and 3/8''. 2 open end 3/8''-5/16'',1/4''-3/16''(these are the only tools in this lot with markings.as seen in pic.Next is a 10'' adjustable(some chrome chip at jaws but works well. Last is a pair of Proto power...

I have an older Snap on 1/2'' ratcheting adapter. Works well and is in pretty nice shape. part number is 67-b . I will take $45.00 shipped or best offer.

I have a 14 piece Williams angle wrench set ,sizes 3/16'' to 5/8'' in very exellent ,near mint condition. As seen in the picture two of the very small sizes(between the 3/16'' and the 13/64 is missing and between the 5/16 and 15/64 is missing. I added two williams open ended wrenches 7/16 -3/8...

I have a fourteen piece wrench roll made by Burcalo of Buffalo ,New York. Sizes are 3/8'' up to 1 1/4''. the 15/16'' is a very nice Proto.The 7/16'' is a barcalo but not the same series it is a little older.All wrenches are very good and usable. There is your normal wear on some with some...

I have 4 snap on tools here :first is 8mm triple square part #ftsm8e,second is a nearly new 17mm chrome socket #swm171,next is a 3/8 drive wobble extension #fxw1,and last is a 10mm 3/8 drive 6 point impact socket #imfm10. This is another bunch I would prefer to sell as a lot. How about $35.00...

I have a lot of random stuff. A craftsman 2 jaw puller, a general tubing cutter,a 1/2'' drive 12 point Armstrong socket 3/4'', a thorsen 1/2'' dr. 3/4'' universal,Napa 7mm combo. ,2 chisels, a Blue point supreme 9/16x1/2'' open, a craftsman 3/8'' ext. and a ****** little screwdriver....$23.00...

3 rigid tubing cutters , large and small also imperial flare kit. new info.. I have three rigid cutters all still in service until now. First is the #30 which cuts 1-3'', next is the #150 cut 1/8'' up to 1 1/8'' and last is the #15 which cuts from 3/16'' to 1 1/8''. The #15 and #150 (the...

this is a snap on ac manifold gauge for r-22,r-12,r-502. a few of the hoses have some crackage on the hose covering(I do not think they leak),and the blue gauge is missing the little black plug that holds the silicone in.(obviously the silicone needs to be replaced also.I will take $30.00...

New in plastic,leatherman surge. This has the black leather sheath. This is the larger version of the wave.cost just under $100.00 with tax .i will now take $55.00 shipped lower 48....THIS IS NOW SOLD...

part numbers F-5-L and FX-2. there is some chrome wear and chippage on both but still it great usable condition... $20.00 shipped (lower 48)

RIGID F45 BENCH VISE (steel not c.i.)75,000 lb tensile(price drop.$125.00)read me I have an unused rigid f-45 bench vise. This has not been used,but shows very slight shelf wear. A few very small paint chips and light surface rust on the top of the jawa and anvil.This was caused by moisture not...

LARGE LOT OF VINTAGE WRENCHES.WILLIAMS SUPERWRENCH #40330 DOUBLE BOX 1'' X15/16'',COMBO SUPERWRENCH19/32''/COMBO SUPERWRENCH 1/2'',BONNEY#34263 3/4''X7/8''SLIM,SNAP ON OEX 22 11/16'',BLUE POINT DOUBLE BOX OFFSET SHORT 3/4''X5/8'',AND THE SAME 7/16''X1/2'',OLD CRAFTSMAN OPEN END#1731...

this is a reed cv4 chain vise. Condition is used but exellent. this vise will last forever. Works as good as the day it was made. Sold for $190.00 new. I will take 70.00 shipped.(lower 48) or best offer....

5 wrenches here. I will start with the 7/8'' chrome combo 12 point has your normal little swirly scratches,but no dents or chipped chrome.Next is chrome 11/16'' 12 point. In about the same shape, Next is chrome 7/16'' 6 point also in the same condition. These three part numbers in order as...

these are a tough vintage pair of old compound cable cutters Stamped 1945 U.S. HKP. The jaws have a couple small knicks but will cut with no trouble. 12.00 shipped.Lower 48 or best offer. These are made by H.K.Porter in Boston Mass.