Search results

I have a large area in my basement that I have finished with a projector, bar, pool table, etc. It was previously carpeted, but a clogged gutter and 5 inches of rain led to part of that getting wet and stinky from water seeping in through the poured concrete walls so part of that has been cut...

This may seem silly, but where possible I attempt not to buy large red tools for my garage. I try to stick with blue, black, gray, etc. The HF tools come from factories in China that likely sell the same products to others. I have seen a blue version of the same cabinet in Europe, but not one...

The manual for this unit is frustrating. I know how to wire the power to the outdoor unit - no problem. However, the cable between the indoor and outdoor unit is a puzzle. The manual says to match the colors based on the panel diagrams. The indoor panel diagram does not include colors that...

I'm setting up a sports bar in my basement. The area is already finished, and carpeted with the previous owner's nasty carpet. I'm considering taking all the carpet and tack strips out and just going with a concrete floor with some coating to prevent absorption of drink spills and/or pet...

A few years back I put Epoxy down in my garage and a utility room in my basement. The garage was done with a "100% solids" kit I got from Costco that they don't sell anymore. I don't remember the name of it now, but I put Epoxy-Coat down in the utility room, the application instructions...

I put this floor down approximately a month ago. Everything went perfectly and it looked great. I got the batch from my local Lowes. Yesterday I found an area (approximately 1 to 1.5 feet square) that looked like someone had let an incompletely washed out paint brush leak and dry. It looked...

Last night a friend and I finished the floor in his 3-car garage with Norklad. He helped me finish my garage earlier, and the lessons learned from it helped us get much closer to perfect with his. The end result was nearly perfect except for tiny pieces of something stuck in the finish...

I am helping a friend put down a Norklad floor (I did my own garage with EpoxyMaster/Epoxyguard). He decided in an abundance of caution to put down the Devoe Pre Prime 167 as a first coat. After prepping the floor (pressure wash, degrease, etch, patching holes and cracks with Norkan two part...

I have put urethane caulk in several cracks in my floor in preparation for laying down epoxy (Epoxy Guard). I have already pressure washed, degreased, and acid etched. The caulk on the crack repair is about 1 inch wide while the crack itself is much smaller. This happened when I used a putty...