Search results

I just bought a Williams Furnace Natural Gas Direct Vent 1403822, it is about 4 years old. The pilot lights fine and then when the thermostat calls for heat the furnace kicks on just fine, but then when it cycles off the pilot goes out. The thermopile was only generating about 130-140 mv so I...

Mc817 - nice looking cabinet, I checked them out the other day and they seem to be built really well. How do you envision using the top of the base cabinet - will they be a work space or storage or a place for a grinder or ?? Just curious as I think through what to buy or build for myself...

Let me understand - are you saying - The Dricore goes down directly on the concrete, then at least an inch of foam rigid insulation like foamsular 150/250, then the electric heating wires then osb or other subfloor and then the floor covering? Or do I need a vapor barrier? Or is the rigid...

with all the background info that I gave on my project, I never thought to include the fact that I always wear footwear, LOL. That said, if installing electric under floor heat is too expensive than those heated mats may be an option.

Greetings - I need to expedite my plan to make a small office in my basemement. The challenge is to add a little heat to the floor on a budget. it will be an alcove approximately 10 x 8 and is currently an uninsulated slab with glued carpet that I will probably need to scrape off. Walls are...

I am building a Cedar Patio Dining Table and I am using pocket hole joinery. I am new to the Pocket Hole Jig and as the wood for the frame is 2x6, I found it challenging to get perfect alignment despite the clamps I used. Now I am putting the slats in and they are 1 inch thick (actual). As...

A wack with the pliers seems to have fixed it - maybe it was a stuck valve - anyway thanks again.

Turning the cap did not stop the leak. Any other thoughts on how to 'band aid' til the AM? Tried turning off the system but not a real good option as it is still pretty cold - collecting the water in a garbage can so no worries there. Thanks so far to all who posted.

Can anyone confirm what this leak is and if this is an urgent fix or something that an HVAC contractor can be called tomorrow for? It looks like a valve that would normally bleed off extra air?? It is spraying water. We are in the Northeast and have had extreme cold - but the basement has...

1) the garage is attached 2) There are some panels and breakers associated with the Solar Panel install, but I don't think you are asking about that. THere is one main panel. A separate fused cutoff for the AC compressor outside, but again, no subfeed for garage

I need to run at 220 V circuit to the garage as I have moved up to a bigger table saw. I have a 30 amp unused circuit running to the dryer in the basement which was switched over to natural gas many years ago. This leaves this circuit as unused. The house is from the 50's, and the wire and...

Thanks. Yes I am using junction boxes. Your help is appreciated.

I am putting up lights in my 1 car heated garage (10' x 24') and will be running part of the circuit in 1/2 inch PVC conduit. It is all on one 15 amp circuit. There will be two fluorescent 2 bulb lites on switch 1 and four 2 bulb fluorescent lites on switch 2. There will also be an...