Search results

Not sure if it's a good deal or not, but it is $100 off. I picked one up since I blew up my crappy Craftsman one. Valid through January 12, 2019. https://www.fleetfarm.com/detail/dewalt-10-in-job-site-table-saw-w--rolling-stand/0000000279419

Yes, another Rust Bullet thread ;) I have a two-car garage with one stall being extra deep which is where my workbench and tools are. Since I can't move all of my stuff out of my garage and keep it out there for multiple days, I decided I'll do it in sections. I decided to do this smaller...

After researching drill presses for a long time and keeping on eye on CL, I decided to bite the bullet and just pick up the Porter Cable from Lowes. There is no runout on the spindle, and only slight runout (~.002") on a chucked up piece of tool stock. I could always upgrade to a nice chuck in...

ALL SOLD - Channel Lock GS-41, 4 sets Bought a bunch of these when they were on clearance, and have 4 leftover after giving some away to friends. http://www.menards.com/main/tools-hardware/hand-tools/pliers-plier-sets/channellock-set-4-piece-mechanic-pliers-set/p-2176202.htm Contains: 3026...

I'm starting the task of hanging and running gas line to a 50k Big Maxx heater tomorrow, and at the last minute I'm doubting my mounting location. Here's my garage. Basically a standard 2 car with the right stall being extra deep. I was originally going to mount it right in the corner above...

JonnyC's 2.5 Car Garage I bought a house over a year ago in Wisconsin, and after finishing my basement workshop I'm finally turning my attention on the garage... Wow, that is in need of some serious organization. Hard to see but there is a '83 Suzuki 650 back there down to the frame that...

Just stopped in at Home Depot today and they put out the Father's Day deals. $99 - 24v Ryobi String Trimmer/Edger w/ Hedge Trimmer Combo http://www.homedepot.com/p/Ryobi-24-Volt-Lithium-ion-Straight-Shaft-Cordless-String-Trimmer-Edger-with-24-in-Hedge-Trimmer-RY24212SB/204732053 I've been in...

I bought an older Campbell Hausfeld 5 hp 60 gallon compressor on the cheap from a local auto shop that was upgrading. This has a VT series pump (two cylinder in-line) that was weeping quite a bit of oil. I finally got it wired up last week and to my surprise it reached 120 psi and was...

I recently used the Diamabrush Mastic Removal tool to remove carpet glue from my basement floor. I should have used the Prep tool as I wish it had done a bit more grinding. However, I ran it wet but did not wet vac the slurry right after grinding. Well, it's now dried and is not easy to...