Search results

suspect they will want a footer on the hill side on Virgin ground which looks to be about foot or 2, no idea where your frost line is. Sent from my SM-N986U using Tapatalk

35 loops WOW 5k feet of the stuff :rocker: Circulating yeah yoru right not really pumping just keeping it flowing. I agree contamination should be next to nill :) Do you have any loops that are multiple loops without a valve on the manifold for each loop? Not sure if you noticed but I...

My question was more about the fact he has 4 loops connected to 1 pump with zero control of which line(s) flow water. So flow will be determined by resistance of each pipe I was impressed the loops are within 2 inches and over 200 feet they should be fairly equal, but the flow will still be...

been in WA state for 30+ years don't recall green mold on my garage walls. do you have vents in roof above? or is it 100% 2nd floor. I suspect you need some ventsvents in general. mold could be from when they built as well. go visit neighbors and ask them to compare. Sent from my...

Looks like it is 1 big zone,:3gears: do you find the heat "on the floor" to be about the same in each zone? Seeing as you have 4 paths for the water to take I wonder how even it flows VS the 1 line with the least amount of resistance.

I would build a shop with a smaller apartment attached by a smaller breez way if you can or as an attached on the side as little as possible. if you don't care about height inside could have it as part of the home/shop but more common wall space is a negative in my book from a sound, fumes...

I feel if you could put middle height ridge roof between new and old to break up the changes in height. maybe even a dormer at the other end, or ridge come out over the front door. 2 roof lines won't do you justice for looks but 3 4 5 will help blend it all in. Sent from my SM-N986U using...

So hydro testing for DOT cylinders say a SCUBA tank, O2 tank, Argon, Fire extinguishers ETC is done by putting the tank being checked filled of water into a chamber that is also filled with water and then they pressurize the internal tank to test it, as the tank is being tested the expansion is...

now that is the way the shop should have been built. loved the fact you made a crane out of the beams. Sent from my SM-N986U using Tapatalk

back in and space to back come to mind don't short change the driveway. not sure how busy road is bathroom? height? I like the rear door Sent from my SM-N986U using Tapatalk

slow them down. until they just back a truck into the door Sent from my SM-N986U using Tapatalk

I would cover it worse out come is you waste time covering it. Sent from my SM-N986U using Tapatalk

in my area there are companies that specialize in small load concrete they mix it on site and charge based on how much you need use, very economical, cheaper then redimix way easier then bags. Google concrete mix on site should find some. Sent from my SM-N986U using Tapatalk

forklift can move empty ones. Sent from my SM-N986U using Tapatalk

Still at the hardware store. My last 2 homes were the same way. Unsure why but never have had one on any home I have lived in. I reckon not having a backflow device or pressure regulator just means I use the neighbors expansion tank.

Looking to tool up and after a few min in the store you see 10+ brands. Spent a few on dewalt web site and good grief they have 10+ versions of the same things just with different options, TQ settings, battery tech ETC. I don't have a brand loyalty but used Dewalt 18V for 15+ years now and...

So did you get the building started yet? If you haven't I would find a few hands to help you on pour day "day finishers" they may have an account with a pumper but in reality a pump truck is worth it and reality is I doubt you will have any downtime except maybe waiting for trucks to move into...

What level of finish on the outside and inside for siding and walls? Is that hired out or build yourself... that's a bit more than I expected.

Re: Ok, so what's the summary on finished floor prep? You might look up tile flooring in the flooring section there are a few big threads and they have me looking that direction now over epoxy flooring

The fact that it is water soluble.... is a good thing in my book and way less of a worry then if it was an oil.