Search results

Ok thanks guys

My plan was to use this stuff since it’s free. There’s enough here to double it or even triple the thickness, then was going to put osb over it for the side walls. Still a no?

Will this 1/4 styrofoam roll insulation insulate my steel building? It’s offered to me for free I️ just want to make sure it will be ok to cover the walls and roof with it.

200. Ok I thought so thanks for your help

It's a Murray

I'm running power to a building about 60 feet from my main panel and was planning on using 2-2-2-4 ser and 2-2-2-4 mhf wire my question is can I still use this wire my panel says when using aluminum conductor use #1 awg rh type aluminum.

Can't seem to get pics to load the right way lol.

Label says #1 AWG can I still use 2-2-2-4 ser ?

Ya it's a Murray

And I haven't contacted my electrician yet cause I'm still working on routing the wire so far I've ran the ser cable from box to crawl space and have drilled a hole through brick to feed wire through. And mounting the conduit box to the brick. Next all I gotta do is dig a trench and lay my conduit

Lol. Ok when I get home I'll check to see the label. All I know is it looks to be the original box from the 60s. My bad I thought from the numbers I posted that were on one of the other breakers style mp fj-17 that might help. Thanks guys

What type of 90 amp double pole do I need

can anybody tell me what type of 90 amp dp breaker I need for my main panel I noticed on one of my 30 amp dp breakers it says style mp fj-17. Or what do I look for on the breaker to know what kind my panel accepts

And thank you for your detailed pics

Yes I'm going with conduit. I'm using 2-2-2-4 ser from main breaker then down through crawl space to a junction box where it will meet 2-2-2-4 mhf in 1.50" conduit

ONLY thing I'm doing is buying the wire and conduit and digging a trench and installing the wire through the conduit to cut down on cost so all the electrician has to do is install the wire. Plus I'm learning from you guys and I approve all the help.

Nevermin I see it now 2-2-2-4 service entrance

Ok what wire do I use from main box to junction box?

Ok so what wire will allow me not to use conduit once I get it under house

Thank you. So my plan is to run the 2-2-2-4 mhf wire in conduit underground and drill a hole into crawl space and run wire to main box which will be about 8 feet from the drilled hole . Now after the wire gets under house do I still have to run conduit all the way to box? If so I'd like to run a...