Search results

I find it odd that the government isn't providing your tools and box while you are in theatre working on aircraft.

I have a 22x28 detached walls are insulated with sheetrock ceiling with no insulation in the rafters. There is a noticable difference in outside vs inside temps durring the summer. I cut a hole in the ceiling this spring for a future pull down access ladder and put some ply up there for storage...

I'm not a fan of the drum style fans. Old 30 " pedstal fans are the best in my opion. New Lasko 30" pedstal is about 160 at Sams or Costco. Patton and Lasko both make high velosity floor fans in the 20" - 22" range that move a lot of air.

I really think that extra Wilton would find a good home in my garage which lacks a quality vise.

The MWR Auto shop I used to frequent has several large (5x5) swamp coolers on carts for use in the summer. We ran one pointing down the middle of a 12 bay shop. 2 lifts and 5 bays on one side and 5 bays on the other. Doesn't cool the shop really but when you need a cool down, just stepping back...

Update - Engine broke free last night. Now it is time to drain all of the fluids that I've been pouring into the engine over the last several days. Add some fresh oil and see if it will start. 1st day PB Blaster 2nd - 3rd day Mix of ATF and Acetone 4th day Coke Back has been bothering me so...

I have houses in my area that are more of an eyesore than that treehouse.

Thanks for the replys. I squirted PB Blaster in the spark plug holes last night and will try a breaker bar on the engine this evening. If not free I'll mix up something stronger. I'm hoping that the rust is light since the motor has been under a closed hood just no plug or carb for the last 3 years.

Not a purchased system but I built this slat setup for storage in my garage. Ran the slats from 30" off the floor to 7' with a 6" spacing. Just an alternitive if you are interested. Doesn't look as nice as the high end slat wall system but much cheaper. I built this system running down a 28'...

I need some advice on getting this engine to break free. Background – Dragged a 74 Scout II out of a yard in 06 replaced plugs, wires , points and condenser, changed fluids and with a new battery it ran. #3 cylinder had burnt valves. Pulled head in sometime 2007 and had it rebuilt by local...

The foil bubble insulation is really only good as a radiant heat block imo. I have use it in my horse barns to block the heat from the roof in the summer. I have foam panels (R7.4) for insulation that works well but I live in a mild winter area. Mid 20s is my normal nightly low.

I don’t have an opener but when we move to the current property we were looking at one from TSC. It wasn’t the entry level one but next one up. We have several friends that have had good luck with their openers from TSC. I changed my mind because this is the main access to the property and my...

That 1x6 was put in place to hold the trusses while being set in place. You can remove them without causing problems.

I don't see how you been able to wait this long without assembling the lift.

Not related to your question but how do you get 3 cars in a 22x28? That's the same size I have and I can get 2 small cars with a little working room.