Search results

Had a simiar issue uset a 1/2 to 3/4 snapon adaptor and 2 inch wide by 3/8 thick 3 ft long piece of flat stock. Drilled a hole into an end then welded it and ground it down. And you have a 3/4 inch drive tool that is just over 1/2 inch thick. Rounded the ends it has had tons of torque on it...

3/16 cable with a breaking load of 4000 lbs means it has a safe working load limit of 1000 lbs . Rolling resitance is5% to 10% of load weight on hard flat ground. Damage resistance in other words draging it is 66% of the load on hard flat ground. The math that goes into winching(comealong) is...

If it is a two.piece socket,bit one I pull the bit pitch it and buy a snap on replacement bit to place on the socket. Bought half my husky st now has snap on bits in them.

I just bought a set of sae and metric of ebay a month ago after thying to fix my boys rc car and not having any thing that small.

I have an sae set made by SK, I am looking at metrics from carlyle. As a near future purchase.

For what your question is the duralast from the zone are decent wrenches. I went to home depot and bought two sets each of the husky wrenches in sae and metrics one set for each car. And the are doing well .

Dewalt Snapon Mac Pittsburg Ir Grey Sunex Wilton Napa Tekton Gearwrench A host of others

So our shop manager has informed the techs and drivers that he is contacting a tool trucks franchise company . He is giving us 2 weeks to square with this dealer . After that the dealer will not be permitted on the property. Not a big deal no one owes him anything , he has a 2 to 3 month...

We have rhino ramps at the hop I use to work at the new shop has otc commercial ramps.

Lots of 12 point bolts and nuts on commercial trucks. Just saying.

Must be very minor work not even a finger print on a white wall. I wouldhave burned the place down using your idea. Clamp the tie rod end in there heat it cherry red with torch, burn down shop. Lawn mower blade sharpening n mower blade with grinder lots of sparks. Might be good for building...

The extending indexable head prybar is the bar of choice at work . I drive heavy wrecker,great for pulling drivelines and axles.I did bend a hollow handle using it as a lifting pin for a semi

Yes today is that time.

I found that my chrome 12 point metric shallow sockets at work are stanley right next to the sunex stuff

I own sunex ,sk,cman, napa,gearwrench,tekton,carlise,snapon,husky,a few china,tiwaian, india also.

I have afew of there sockets that was the line the local owned independent auto store sold . They are on par c-man sockets.

I have the black diamond plate box from home depot. Add fold up steel handles to the side and it will hold.weight.

I havea set of stanleys found a near new set in a parking lot . Mostly they set in the closet as another set of spares.

I choose autozone duralast line for this item http://www.autozone.com/ratchets-sockets-and-wrenches/ratchet-and-socket-set/duralast-39-pcs-1-4-in-drive-mechanic-s-tool-set/914105_0_0/

If you want the best tie downs for trailers look into WreckMaster tie down kits . These are pro strength straps that will hold duelly pickups ,and ambulances .