Search results

I also replaced mine when the panels started bowing and were about to fall out. I bought the replacements from Menards. I just looked , you can get a 9x7 insulated door for $539

SATA® 19-Piece SAE Combination Wrench Set at Menards® https://www.menards.com/main/tools/hand-tools/wrenches-wrench-sets/sata-reg-19-piece-sae-combination-wrench-set/sto8412g/p-4483528727319973-c-9157.htm $19.99 - same set on Amazon is $99

I was going back and forth about ordering it and pulled the trigger just in time!

For those who are near a Menards, they have the 2 pack on clearance for $17.99. https://www.menards.com/main/tools/hand-tools/measuring-layout-tools/angle-finders-squares/swanson-reg-speed-reg-square-kit/sw1201k/p-1489990806394-c-1549901401005.htm

Thanks! I grabbed one, also mine had a $1.20 off coupon, not sure if that is regional, but I'll take it!

MyQ (Chamberlain, Lift master) will alert you. I get a push notification every time my doors open and then another one if they remain open for more than 15 minutes. I have it built into my openers, but they also sell an add on. https://www.myq.com/smart-garage-control/p/MYQ-G0401-ESMC

I cut off the tongue and start with that, that way I can use a 2x4 and a sledge on the groove side to hammer the next piece in.

Do you have to be above the roof? I ended up putting my antenna in my attic as high as I could get it and have not had any troubles. This is the antenna I went with: https://a.co/d/dYDXqn1 might be worth a try, if it doesn't work you can move it outside.

They do make safety glasses with readers. I recently bought a DeWalt pair (DPG59) with bifocal readers but there are also full reading safety glasses available.

I started using the bullet journal method a couple years ago. I always wanted to have a journal but never could really get into it until I discovered bullet journaling. Mine is mostly to do lists and some documentation of things around the house. I am currently using an Exceed dotted journal...

Absolutely, on the outside I can touch the part of the fitting that contacts the wall and it only feels warm, not hot after running for awhile.

Yep that's right. From the inside I used a 3"hole saw to cut through the drywall and insulation and then on the outside I cut a hole through the siding that matched the gasket/plate that sandwiches the siding. I only have 3/4" thick dutch lap siding, no sheathing underneath (it's an old garage).

The fitting you see in the wall is the back of the fitting I linked to in post 5, although it looks like they are out of the straight through fittings and are just selling the angled one right now. You can get any of the others listed on Amazon, I suspect they are all made by the same place...

Here is how I have mounted. My walls are 2x4 with fiberglass insulation and 5/8" drywall. I just moved it to this location so the hole is open, but normally I have a piece of 3" round duct inserted and then I stuff it with rockwool and have not had a problem. Edit: attached photo

I have a diesel heater in my detached garage (20x24) since last year. I'm running it out through one of these: https://www.amazon.com/dp/B0BRPQR7DQ/?tag=atomicindus08-20 I'm really happy with the heat it puts out. I may add a second one to get it really warm, but otherwise I am able to work...

FYI, the pink laser level is back in stock for $39.99 and then there is a $10 coupon that brings it down to $29.99.

When I put my door in with an 8500 opener, I added cable keepers to the bottom to keep tension on the cable: https://ddmgaragedoors.com/parts/part/BF-CK.html

I still use the old version of sketchup named SketchUp Make 2017. It appears that it is still available as a download from the internet archive: https://archive.org/details/sketchupmake-2017-2-2555-90782-en-x64

I have a couple liftmaster openers. I had 2 left over cfl bulbs that I put into one of them, the other I needed to purchase bulbs so I bought Genie brand garage door opener LED bulbs, they work well and I have not noticed any interference.

It's currently on sale at woot for $75. I just bought one myself. https://www.woot.com/offers/noco-gb40-boost-plus-jump-starter-10